Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2813
  
|
daft question.
Are the D3 and D4 FBHs the same?
I have the original one from my 55 plate D3 HSE in the garage that I was going to refurbish and keep as a spare.
Am I right in thinking it won't work in a 2015 D4?
Thanks
Nasher Heaven doesn't want me, and hell is afraid I'll take over.
|
 9th Nov 2019 4:37 pm |
|
|
|
|
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2813
|
Thanks DM, I'd best put it in the for sale section then.
I'd guess the BAS '3rd Button' controller I took out the D3 won't work either then
I was going to use it until I can get an Altox.
Nasher Heaven doesn't want me, and hell is afraid I'll take over.
|
| 9th Nov 2019 6:04 pm |
|
|
Gizmoo
Member Since: 23 Jun 2017
Location: Worcestershire
Posts: 6
 
|
Hi, I’ve fitted the BAS controller to both a D3 I had and the D4 I have now.
As mentioned the FBH has to be enabled in the ccf file on the D4. I used my IID tool
The 3rd ( follow me home headlight) button is wired the same on both so it can be used.
The controllers are wired the same on both also, ie, just the positive, negative, green wire to pin 2 I think it was on the FBH, then the blue wire to the headlight low beam ( blue with pink trace)
I am more than happy with this controller .
Hope this helps and perhaps saves some money.
All instructions are on their website Disco 3 55 plate - gone
Defender 130, 5 door safari, 200 tdi
Disco 4 GS 62 plate
|
| 9th Nov 2019 10:03 pm |
|
|
