Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Bluetooth or not bluetooth?
I have just got my iid tool and while playing with it I noticed it told me bluetooth fitted! I have a D3 SE with HK premium sound system 2006 model, but no phone cradle in arm rest,and when I press the phone button it tells me no phone fitted! So is it possible that bluetooth is fitted and if so how do I access it as I dont get asked for a pin and my iphone cant find it,or is the iid tool telling me porkies! any help would be great. I do have a bluetooth kit plugged in to the aux and that streams my music ok but the phone is a bit naff.
5th Dec 2019 7:05 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
Do you have red and green phone buttons on the side of the steering wheel.
That is the key question.
5th Dec 2019 8:07 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5052
If you have the green/red steering wheel paddles the paring code should be 2121yµ (idµ - eAµ) ψ=mψ
5th Dec 2019 8:24 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
Of the other code.
5th Dec 2019 10:04 pm
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
yes i do have the red/green buttons now,however I retro fitted the switch packs from a RRsport when I had a cruse control problem! thats sorted now but the original wheel had just the audio/cruise control switch packs.where would it ask for the pin code? and I assume I would input it on the key pad on head unit?
5th Dec 2019 10:07 pm
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Just found the process in the manual, tried it but my phone can't find "LAND ROVER" to pair with, looks like the iid tool has picked up on the fact that I have retro fitted switch packs, or my iphone 11pro is too new for the bluetooth to pick up on?
5th Dec 2019 10:23 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
No phone kit fitted then
Not the first time I have seen fault codes for parts that aren’t fitted!
5th Dec 2019 10:25 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5052
I think the phone paddles had to be an original factory fit to the car for it to be present. Still, have a go and scan on your phone for the bt signal and see its present!! If it is click connect on the phone and then enter the pin to connect.
Edit: Pls ignore as I just saw the above posts now yµ (idµ - eAµ) ψ=mψ
5th Dec 2019 10:29 pm
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
No worries, just a bit that the iid tool told me bluetooth fitted!!!! and thanks for the advice. Short of pulling out the interior light panel to see if there is a microphone fitted in there somewhere or try to trace the module to where it should be fitted!
5th Dec 2019 10:55 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
The mic will be fitted if you have the voice button on wheel.
Phone module is in boot behind right side panel.
But face facts. You don’t have it.
5th Dec 2019 11:07 pm
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
No that was retro fitted too!!!! from the RRsport wheel!
5th Dec 2019 11:21 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
I’m interested in this, as mine is as you explain but do I need to activate something with iid tool ? I’ve search with my phone for blue tooth and nothingMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
6th Dec 2019 5:54 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
If you don’t have red and green buttons on wheel then you won’t have it
6th Dec 2019 6:35 pm
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
Pete K wrote:
If you don’t have red and green buttons on wheel then you won’t have it
The fact whether you have the buttons is irrelevant unless you are talking about from the factory.
We have bluetooth in our D3 but I have never fitted the steering wheel buttons and it works perfectly fine so you cannot assume no buttons to mean no bluetooth.
@andy-p where are you seeing that you have bluetooth fitted? If it's in the CCF settings then it doesn't mean you have it. Anyone with an IID can enable that setting even if the module isn't thereIID PRO
MSV Extreme
Nanocom One
6th Dec 2019 6:59 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5052
Depends on what level/spec is fitted at the factory yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
that the iid tool told me bluetooth fitted!!!! and thanks for the advice. Short of pulling out the interior light panel to see if there is a microphone fitted in there somewhere or try to trace the module to where it should be fitted!
