Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
I have the older grey version, well two actually, one wth digi readout and one without, both do the same job, but the digi readout tells your battery voltage wow
Both a few years old now, and both still do the job.
I think this pic in the advert is to signify its so easy to use its childsplay .
Or she is saying yes dad its only showing 12.2 volt so I think its the alternator The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
10th Feb 2020 6:58 pm
Andy500
Member Since: 27 Aug 2018
Location: Cheshire
Posts: 228
The Aldi version is in store on Thursday as well I think for a bit less as well!
10th Feb 2020 8:26 pm
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
Does anyone know the current output?Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
10th Feb 2020 8:34 pm
G_Cam
Member Since: 12 Aug 2010
Location: Fife
Posts: 2061
good wee chargers for the money.. my son in laws has lasted longer than my 3.6 Ctek!1 TR6 Rusting away quietly
1 FARR UTV SOLD
1 International Harvester SOLD
7 x D3 all SOLD
2 x D4 both SOLD
1 x Mrs D4 'Panther' SOLD
1 x Outlander van SOLD
1 continual stream of car parts and me living in the garage...
10th Feb 2020 9:01 pm
G_Cam
Member Since: 12 Aug 2010
Location: Fife
Posts: 2061
knwatkins wrote:
Does anyone know the current output?
3.8A iirc... its a trickle charger so they dont generally have big amps output..its got auto sensing and does car and bike batteries 6v/12v again irrc?1 TR6 Rusting away quietly
1 FARR UTV SOLD
1 International Harvester SOLD
7 x D3 all SOLD
2 x D4 both SOLD
1 x Mrs D4 'Panther' SOLD
1 x Outlander van SOLD
1 continual stream of car parts and me living in the garage...
10th Feb 2020 9:05 pm
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2227
Hi,
I got one last time around
All seems to work well, had it on the AGM setting via the towplug on our FL2 and it was into Maintain mode in a few hours, unplugged it this afternoon
I have cut the croc clips off and Put a small multiplug on, as I have 3 different fly leads K use
Multiplug to S towplug is 1 of them
I am happy with it Transit! 2019
Gone D3 HSE 2008
Another Porsche Cayenne 2022
Gone Porsche Cayenne 2020
Gone RRS HSE Dynamic 2016
Gone RRS HSE LUX 2011
Gone RRS HSE 2006
Gone D3 SE 2.7 2008
gone D2 Td5 1999
I plan on living forever and so far so good !
Club DG Mclaren stuff
.
10th Feb 2020 10:43 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Would something like this be any good to maintain the battery whilst programming with an IID or Nanocom or similar, or is the output too low?Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
10th Feb 2020 10:55 pm
pwheeldon
Member Since: 14 Jan 2020
Location: West Yorks
Posts: 1505
Heres the Aldi one:
https://www.aldi.co.uk/auto-xs-car-battery...0347442700Discovery 4 GS 2009 Auto Stornoway Grey
Discovery 3 s 2005 Auto Bonatti Grey Gone
Discovery 3 SE 2005 Manual Zambezi Silver Gone
Range Rover Sport HSE 2006 Black
Aston Martin DB7 VV
10th Feb 2020 11:23 pm
cradgebank
Member Since: 09 Jul 2005
Location: Nottingham
Posts: 73
wizbongre wrote:
Would something like this be any good to maintain the battery whilst programming with an IID or Nanocom or similar, or is the output too low?
Unfortunately, No, the output is too low.
11th Feb 2020 3:19 am
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Thought that likely the case - thanks.Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
11th Feb 2020 10:08 am
J@mes
Member Since: 10 Nov 2008
Location: Bomber County
Posts: 4547
I seem to remember you need about 20 amps to maintain the vehicle while IID'ing!2014 D4 XS
2005 D3 SE - Gone
11th Feb 2020 2:31 pm
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 927
For IID use you need a unit that supplies a clean voltage e.g. "Supply" mode on a C-Tek (not all have it, only the higher amp ones).Visitor from fullfatrr.com
RR Vogue SE 2011 4.4 TDV8
1974 Lightweight
11th Feb 2020 2:58 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2891
OK so Im now in trouble with SWMBO!
There was a Lidl near my hotel, so I thought Id just have a quick look at the stuff in the middle aisle (dont normally go there but since i saw this post I was curious)
So the phone call went along the lines of -
"have you spent £120 at Lidl yesterday or has someone cloned your card?"
"No dear its fine there were some cheap tools and bits..."
"Why do you need more tools, you already have every tool known to man"
"ah but these are some cheap bits I can leave in the cars and some bits I wanted for the garage"
Yep I'm back in the doghouse!! Must stop buying shiny toys....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
