Member Since: 02 Jun 2014
Location: callander
Posts: 2
Replacing EPB Module
Well, what a nightmare. A trial to say the least.
After using Disco_Mikey tips over the last 6 years to free the Park Brake, the module gave up.
Strip out. Hands are torn to bits, patience tried.
Now to fit the replacement.
Any tips would be appreciated. The weather is too good to be stuck under this Disco.
6th May 2020 9:49 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Stripped one out on my scrapper, would have hated to try and put one back
Might help if you had a Mr Tickle costume to hand
Good luck, least the weather is favourable
6th May 2020 10:18 am
sputnixb51
Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833
Hope you made a very good note of cable routing, I found it easier to take out the mount as well it gave much better access to put it all back in (though getting the mount out was not easy. Otherwise it's just work away at it knock off for a cuppa to avoid frustration setting in.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
