bembo449
Member Since: 14 Jan 2020
Location: Gainsborough
Posts: 256
|
Bought a load cover for my D3 and it doesn't fit , should there be brackets for it to slot into ? Ive checked and it looks like its defo the right part
|
20th Mar 2020 10:42 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2869
|
Fits into the ends of the rear side panels just behind the seats - its worth checking that the sprung retainer isnt stuck out past its normal stop position on the cover as this will stop it fitting into the slots correctly Must stop buying shiny toys....
|
20th Mar 2020 10:46 pm |
|
|
bembo449
Member Since: 14 Jan 2020
Location: Gainsborough
Posts: 256
|
Thats what i thought but theres no way it will pal
|
21st Mar 2020 2:16 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12930
|
When I modded mine here https://disco4.com/forum/post1969992.html#1969992
I found the movable bit easily slipped to a position it no longer would move.
Take it apart and I recall it was obvious what was wrong, just slightly tricky to not move it again when reassembling. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
21st Mar 2020 2:32 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2869
|
Did you ever sort this? If you are still struggling I can send you a picture of the part that sticks and how to fix it Must stop buying shiny toys....
|
25th Mar 2020 7:18 pm |
|
|