Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
Plug and pin out terminal pins
So I am looking for some part numbers, in particular for the terminal pins male/female ones for the headlight plugs and the pins that are in the headlight pin plug that the headlight plug couples to on the headlight. I had thought I had found them as TE 1.5mm male and female but the locking mechanism on the terminals was not correct and they have not locked into place.
I did my cornering lights anyway hoping the pins would hold together for them to work and they actually did. However I am looking for the correct ones before I do my DRL mod.
I would asume that there is a list of all of the male/female contact pins out there somewhere for all of the ones needed for the various electrical plugs and pins, but I can't find the spec.2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
18th Apr 2020 11:24 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Hi
Just found these but double checking there the correct ones
Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
Good Find
I appreciate your efforts. I have contacted Simtek who I ordered the pair of connectors from. I will see where my order is, but if it will be some time I may just go ahead and get the ones you have here.
Thanks a bunch2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
19th Apr 2020 4:32 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
The part numbers listed in the LR wiring manual is the safest bet however they aren’t always the cheapest. I’ve had to buy direct from JLR in the past when some of the special connectors they use aren’t available from other sources (they are good at using hybrid connectors).
Although your connector isn’t listed in the below link, book mark it as JLR use a lot of Ford Motorcraft connecors and it may be useful in the future.
https://www.motorcraft.com/content/dam/for...k-2016.pdf012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
19th Apr 2020 9:37 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Re: Good Find
Ruper wrote:
I appreciate your efforts. I have contacted Simtek who I ordered the pair of connectors from. I will see where my order is, but if it will be some time I may just go ahead and get the ones you have here.
Thanks a bunch
Ur very welcome and fingers crossed can get it sorted
19th Apr 2020 1:04 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
M3bobby wrote:
The part numbers listed in the LR wiring manual is the safest bet however they aren’t always the cheapest. I’ve had to buy direct from JLR in the past when some of the special connectors they use aren’t available from other sources (they are good at using hybrid connectors).
Although your connector isn’t listed in the below link, book mark it as JLR use a lot of Ford Motorcraft connecors and it may be useful in the future.
Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
Connectors Well Done
Well thanks to both for the info (gstuart/M3bobby) I had a fuel pressure sensor connector that broke due to being brittle and had to go to a bone yard and I was able to find a like substitute on a couple ford Expeditions/Explorers as I had saw some ford emblems on other connectors.
Now I can actually find the right ones when I need.
Saving both catalogues in the ever expanding file folders. I am finding most of my problem re age related sort of like myself.
Again big thanks2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
20th Apr 2020 5:20 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
They are Yazaki 1.5 Sealed System parts, a source in the USA is Corsa Technic:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum