Member Since: 16 Sep 2019
Location: Newcastle Under Lyme, Staffs
Posts: 171
suspension compressor ECU
My iid tool shows me there is an ECU update available for the suspension air compressor, I read here about the Hitachi & AMK compressors.
I'm sure my newly acquired 2005 SE had a new compressor last year, but I think it was a Dunlop unit.
Which software if any do I need for that ?
Thanks
Mat2005 TDV6 SE Auto
Cairns Blue
30th Mar 2020 12:22 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
My opinion... if there is no problem, do not fix/update it...
I know it can be tempting, but why should you do this?
Only after knowing the pro’s and con’s for this update you can make a decision IMHO and only then it can be interesting to know what you have... but maybe it is answered then all ready 😉Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
30th Mar 2020 4:06 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5044
Hitachi and Dunlop use the same software. AMK is different, but it would still run on an ECU using Hitachi and vice versa. The updates have slightly different operating parameters, so it is best to run on the correct software to get the best out of the compressor.
If you pop off the compressor cover you will be able to see which compressor is fitted. Then see what software is installed using your IID, update accordingly if required.
The software is in your IID!!yµ (idµ - eAµ) ψ=mψ
30th Mar 2020 4:47 pm
matgriff
Member Since: 16 Sep 2019
Location: Newcastle Under Lyme, Staffs
Posts: 171
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
