Member Since: 12 Jul 2016
Location: west midlands
Posts: 3
Replacement ignition barrel question
Hi all,
It's a long story but I have to change the emergency access lock barrel on passenger door. I can buy a used barrel with ignition barrel and keys. Will just swapping the ignition work or will it need recoding?
Cheers.
4th Mar 2018 9:40 pm
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2081
I would have thought if you just use the new blade and barrels with the existing fob (Remote) , it should work as you are using the old transponder and remote.
5th Mar 2018 12:16 am
D3MB
Member Since: 12 Jul 2016
Location: west midlands
Posts: 3
Thank you for the reply, I think I'll give it a go.....
8th Mar 2018 9:57 pm
desv8
Member Since: 01 May 2020
Location: CHELTENHAM
Posts: 134
Hi
New on here and just looking at your post. Out of interest were you able to just change the ingnition lock without the need for any re programming?
Have a similar issue whereby i want to change out the ignition lock and emergency N/S door lock but use the original switch and key fob by just changing the key blade?
Thanks.
3rd May 2020 7:47 pm
D3MB
Member Since: 12 Jul 2016
Location: west midlands
Posts: 3
Hi, You can just swap the barrel on the ignition without the need to recode. It's still working fine today.
3rd May 2020 9:14 pm
desv8
Member Since: 01 May 2020
Location: CHELTENHAM
Posts: 134
Thanks much appreciated.
4th May 2020 8:29 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1807
Was there an easy way to get the barrel out or a lot of disassembly
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum