ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
  
|
Hi - I'm about to buy an IID tool - having lasted for a good few years with a Hawkeye which has largely done everything I need (and has got a licence for most LR models over the years), I'm going to go for it, largely on the back of the positive feedback on here.
Just a question about mileage - when I bought my D3 a few years back, it had a mileage anomaly (it 'lost' circa 70K miles between two MOT's). I'm keen for the odometer to be correct which means adding the 70K back on. Having read a couple of older threads, there's one that indicates that the correct mileage can be 'pulled' from the central ECU using an IID tool. Have I interpreted that correctly? Just looking on the GAP website, I couldn't see how/where this command would reside. Will the IID tool enable me to correct the odometer?
Thanks in advance, Chris
|
 24th Nov 2020 2:08 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
  
|
You can sync the ipak for mileage but only to add miles, you cant take them off. If you change the ipack for a second hand one, and the second hand ipack has higher mileage it will keep that mileage.
If you fit a new Ipack and sync that it should show the correct miles.
Flack 
|
| 24th Nov 2020 2:32 pm |
|
|
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
|
Perfect. That's what I thought I'd gleaned from the previous thread. Sadly it is adding miles, 70K's worth 
Thanks for the response
|
| 24th Nov 2020 2:36 pm |
|
|
