well, specifically the metal used for the front end ... where your bonnet latches down to, grille clips in to, lights clip to etc.
Had to drill a hole in mine today and it drilled like aluminium. and as a result, drill went through with a bang and I snapped a 2.5mm drill bit. when i'd finished, grabbed a magnet to see if i could find the piece of drill bit and lo and behold, the "aluminium" swarf danced about but wasn't strongly attracted to the magnet.
what is it ?.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
25th Sep 2020 6:45 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6759
The internet says “In addition to regular steel, the LR3 uses aluminum, magnesium, and high-strength boron steel in strategic locations to improve strength or reduce weight”
Same applies for D4.
25th Sep 2020 6:54 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776
I know the body panels are aluminium, the chassis is steel, the body frame is steel, there are high strength steel components in safety critical areas, and lots of plastic. Not sure about the slam panel though. If it’s magnetic it’s steel, or an alloy containing steel.
25th Sep 2020 6:54 pm
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
From my D3 experience,
Mostly Chinese chocolate!!Series 1 V8
Series 2 Hibrid V8
Discovery 3 HSE V8
25th Sep 2020 6:58 pm
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2083
I think you will find a lot of the body panels are steel.
25th Sep 2020 7:44 pm
Emmet McKnight
Member Since: 19 Jan 2018
Location: Derry
Posts: 265
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum