Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
Slight steering wheel vibration after belt change
Evening,
Had my F&R belts done earlier this week and at the first set of lights coming home I detected a slight vibration in the steering wheel. Carried on as it was late and raining. Since then I have just done the one journey tonight (100m) and it is there everytime at stopping. Putting it in N makes little difference. I am sure it wasn't there before as I notice this stuff
So my Q is, is it possible that a LR Indy could have messed up the belts? (I assume they don't take the starter off and lock the flywheel as too busy...). But surely they know what they are doing so I am thinking must be either me or something not done right.
What are your thoughts because it will drive me nuts until I know what it is. And would like to be informed before I go back with it.
Cheers.In today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
Check to make sure all the vac pipes are fitted, as these are removed to do both belts..
Flack
14th Nov 2020 9:22 am
RATA1
Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
Thanks, I'll take a look when it isn't raining or dark..In today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
2014 Discovery XXV
1961 Series 2
14th Nov 2020 11:30 am
RATA1
Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
Had a good look around the front and the back and other than a lot of pipes and cables not clipped back properly all looks good.
Is this a common thing after a belt change then or from "new" until things loosen up?
TIAIn today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
