itstime222
Member Since: 14 Aug 2017
Location: Sussex
Posts: 78
|
Afternoon all,
So I have to source a 2nd hand gearbox and torque converter for my D4 - problem is i dont know what I'm looking for! Its a 2010 TDv6 D4 3.0 litre - is there somewhere I can go to find out the part number? Or was there a certain gearbox used in the early D4's? Don't even know if its the 6 speed!!!
Any help much appreciated!!
|
 9th Dec 2020 5:10 pm |
|
|
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 309
 
|
Go to Nanocom-diagnostics.com and click on the Genesis tab. From there you can enter your vin number and find your as built spec with parts numbers.Good luck! 
|
| 9th Dec 2020 5:16 pm |
|
|
itstime222
Member Since: 14 Aug 2017
Location: Sussex
Posts: 78
|
Hi - thanks for that but it wants me to register and it won't let me without a nancom device 👎
|
| 10th Dec 2020 10:18 am |
|
|
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 309
|
You do not need to register or have a Nanocom , Just go to the Genesis part of the website and enter your vin at the top right hand corner, then choose CCF edit, then edit again which you can then read the various build numbers, You only need to register if you want to do any actual programming.
Last edited by Dondiddy on 10th Dec 2020 10:26 am. Edited 1 time in total
|
| 10th Dec 2020 10:22 am |
|
|
|
|
