Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
Air Jacks
Show of hands please .
Who has any experience with these (D3 specific) and which one do you have
Thanks
Heine
PS Spoke to Anthony (baben) earlier and he mentioned that the Front Runner one only gets supplied with one connector - so how do you block the other exhaust . The Takla one has additional bungs (purchased seperately) but doesn't come in a bag and is rounder which makes the car more unstable .
3rd Mar 2008 1:08 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
I have a TAKLA. its got an exhaust inflator (but the TAKLA 2nd exhaust bung is useless - talk to No$h, he made some excellant bungs) TAKLA also has an air valve for inflation from a compressor.
Down side of my TAKLA is that the bung fits inside the exhaust pipe so the black soot gets all over you.... even worse in the wet
Also, mine got a leak on the seem after 4 inflates. Does raise the D3 well though...
put my takla in an old pop-up-tent bag and strapped it to the roof rack Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
Last edited by DiscoDunc on 3rd Mar 2008 1:18 pm. Edited 1 time in total
3rd Mar 2008 1:14 pm
Alex08
Member Since: 09 Nov 2006
Location: Glasgow
Posts: 1600
Takla with NoDo$h bung
3rd Mar 2008 1:16 pm
Atacama
Member Since: 12 Jul 2007
Location: Paulshoff
Posts: 174
Will be making some bungs for mine next week. will see how it works and let you know.
The Takla is great, although I have found (as Dunc has) a tiny leak on one of the seams, although nowhere near enough to cause me any concern (it would take hours for the car to lower noticably).
EDIT: Of course you need to make sure you chock the car.... I managed to snap the hose connector on mine when I failed to adequately jack the car and it rolled forward off the jack The bayonet fitting does seem to be a potential weak point in the hose and you need to look after the silicon washer that keeps the hose sealed. I remove my washer after each use and keep it in the puncture repair kit that comes with the jack.
Frontrunner Air-Crane and the ARB X-Jack seem to be the other ones people are using. No experience of these I'm afraid.I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
Last edited by NoDo$h on 7th Mar 2008 12:26 pm. Edited 1 time in total
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
Atacama wrote:
Will be making some bungs for mine next week. will see how it works and let you know.
Can I order a set please
Prepared to pay in beer or any other suitable currency
7th Mar 2008 12:04 pm
Deondef
Member Since: 08 May 2007
Location: Randburg
Posts: 790
Me too
7th Mar 2008 2:24 pm
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
I got a cheap one from k-mart. Works well.
I do stick a rubber mat above below it when in use though. Given the price difference I would have to go through three of these for one of the expensive ones.
Got a test plug bung from plumbers supplys.“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
Easy lift for me also.
Had it 15 years, used it twice, no leaks yet.
Non StickI am a hob nobber.
8th Mar 2008 10:09 am
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
Dunno if you can buy easylift here?
Either Takla or FR is good enough. We have both, and have used them multiple times (more than 10x) without any failure.
I personally prefer the FR, because its rectangular, so you can arrange it to favour force in a particular direction whereas the round ones tend to bend over wherever they want to.
Take the attached pic as an example - we wanted the vehicle to be able to "flop" over the jack backwards but not to move sideways too much. It worked great, and we didn't cause any damage to the jack at all.
Doesn't look like much, but this dear friend of mine was up to the chassis in the sticky mud of Nata. Without an airjack and sand ladders, I suspect he would have had to sleep in the mud that night. We had little or no traction on the tow vehicle (my D3) despite having the best tyres you could wish for in that particular situation. (Methinks the mud at the midrand quarry is about the same )
After picking him up out of the poo with the jack, and inserting the ladders under the wheels (we did the front first) we were able to recover him without much bother. Took a load of headscratching though, and this type of recovery had never been described to me before. Something I will never forget though
10th Mar 2008 8:42 pm
Deondef
Member Since: 08 May 2007
Location: Randburg
Posts: 790
Atacama - any news on the bungs
Baben - heard the story, but first time I see the photo - am I mistaken is that a normal tow hitch your recovery strap is hooked on probably not a massive pull, but did the Pr do not have a rear recovery point
1st Apr 2008 1:41 pm
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
Deon if you're in a hurry I got a set of Takla bungs through Anthony - you can use if you like
1st Apr 2008 1:44 pm
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
Improvisation thats what makes the fun in what we do
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
The bayonet fitting does seem to be a potential weak point in the hose and you need to look after the silicon washer that keeps the hose sealed. I remove my washer after each use and keep it in the puncture repair kit that comes with the jack.
)
do not have a rear recovery point 
