Member Since: 29 Nov 2021
Location: SW London
Posts: 261
Locking wheel nut socket
I lost my lock nut socket and locking nut number 4 when the truck was broken into.
The other 3 locking nuts are holding the spare wheel firmly onto the rear mounted carrier. No one's stealing that!
I can get the 4 unlocked road wheels off but not the spare.
Anyone got a set of photos of the various locknuts?
Or recognise this?
Thanks
Pete
Everything's a hammer.
12th Apr 2023 4:44 pm
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2210
Hi,
think it looks like standard L/R locking nuts, anyone near by with a L/R ask to try their socket on to see if it matches, then you have the nut code, or visit a local L/R specialist they may well have a set you could try, would suggest main agent but it will no doubt be 1/2 hour minimum labour rate and they will need to plug in diagnostic unit
I suggest ring around local tyre fitters, some hold a full set of nuts, and will sort the problem f.o.c.
12th Apr 2023 5:32 pm
Bardley
Member Since: 02 May 2018
Location: Hertfordshire
Posts: 441
If you get stuck, and it's not been put on with a rattle gun, you could try one of these..
Usually ½" drive multi size socket.
Ebay, and cheap.2011 MY D4 HSE
Previously 2001 D2 TD5, 1996 D1 300Tdi, 1985 90 2.2 petrol.
Bikes! KTM, BMW, British, Classics and others.
12th Apr 2023 8:03 pm
Register
Member Since: 29 Nov 2021
Location: SW London
Posts: 261
Thanks both or your input.
I've taken a best guess from ebay photos, so fingers crossed.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
