Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > Europe

Discovery 3 with an engine failure
Post Reply  Down to end
Page 1 of 1
realmasterd
 


Member Since: 04 Sep 2021
Location: Bad Oeynhausen
Posts: 3

Germany 2006 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3
Discovery 3 with an engine failure

Hello from germany,

i bought a Discovery 3 with an engine failure. 2.7 Diesel, Euro4.
It's a special camper edition from Denmark, so I took it.

The car will be transported to the car repair service next week.

When the car was started for the first time, it had developed thick white smoke at the rear. Now no more white smoke at the start afterwards.

I have 2 Youtube videos. Can the experts hear what damage the car maybe have?




This might give us some clues for troubleshooting.
There are no warning lights or error messages in the speedometer.

Thank you very much and best regards
Dejan  
Post #22496634th Sep 2021 1:04 pm
View user's profile Send private message View poster's gallery Reply with quote
latnutgub
 


Member Since: 25 Aug 2011
Location: Huddersfield
Posts: 170

United Kingdom 2007 Discovery 3 TDV6 XS Manual Tonga GreenDiscovery 3

Hi, You can get more information if you used an GAP IID tool.

For this machine it is a must have tool.

White smoke can be caused by

Blown head gasket
Cracked engine block or head
Contaminated fuel
leaking Oil cooler (Through most of the time, the oil passes into the coolant)

Fuel pump timing, Injectors.

Camshaft belt service (done correctly?)

A few more details like engine mileage? would help.

Regards,  
Post #22496994th Sep 2021 4:06 pm
View user's profile Send private message View poster's gallery Reply with quote
realmasterd
 


Member Since: 04 Sep 2021
Location: Bad Oeynhausen
Posts: 3

Germany 2006 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Thank you very much for your answer. Thumbs Up

timing belt was changed in 10/2020, at 264.900 Km.
Camshaft i think is the first one.

the car now have 268.000 Km.

i would take a look on the GAP Tool.

thanks a lot!  
Post #22499116th Sep 2021 8:26 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site