| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
0512dave
Member Since: 12 Aug 2015
Location: Blackpool
Posts: 6
  
|
Hi all you Disco 4 brainiacs.
is there a way of picking up a signal either live 12v, 5v or ground when a trailer is plugged in.
have a camera on my trailer linked to the reverse camera switched between camera's manually, I keep forgetting to either turn it on or off, would be ideal if I could make this automatically switch over
Here's hoping
|
 7th Mar 2021 7:51 pm |
|
|
Duc750
Member Since: 07 Aug 2017
Location: northampton
Posts: 314
  
|
easy if you're on 13 pin electrics - you have a reverse line and a load of constant 12v supplies to play with 05 D3 V8 HSE, LR Passion tree bars, wildbear compressor guard, LRP switch panel, ARB rear locker + compressor, Trigger 6 shooter electrical system
12 RRS SDV6 HSE (Hers) - Gone and replaced with an I Pace - I can tell you now EV is not the future yet
Metalian Camper trailer
|
| 7th Mar 2021 7:59 pm |
|
|
0512dave
Member Since: 12 Aug 2015
Location: Blackpool
Posts: 6
|
Thanks for your input but I need the sensing on the disco not the trailer
I was an auto electrician before retiring, not sure that a method of picking up the sensing is possible,as I suspect it’s all done within the BCM
|
| 7th Mar 2021 8:12 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
