Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > In Car Electronics (D3)

Park sensor issue - bit confused
Post Reply  Down to end
Page 1 of 1
Chris1969
 


Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Alveston RedDiscovery 3
Park sensor issue - bit confused

Hi all...

So, when I jump in the car and just turn the ignition on, I get a beeping from the rear and the orange light flashes on the parking sensor button.

I get this when the car is in park and sensors at the front and rear don't work.

I'm guessing as the beep is from the rear its a problem with the rear sensors. I've turned the ignition to on without the engine running, put it in reverse and taken the handbrake off but there is no sound from any of the sensors.

Currently got the bumper off... all seems OK with the loom...

Any thoughts on what the problem may be? Could it be the actual module that's at fault?

Thanks folks πŸ‘πŸ»

Chris.
 .. still learning Surprised)

Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet.. 
 
Post #221255821st Feb 2021 1:59 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10684

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

THat's rather unusual

Maybe read the fault codes !

Maybe one of the sensors has shorted out.

You could unplug the bumper loom from the car.
Measure resistance between black and brown.

Unpiug each sensor in turn, and see if the resistance changes significantly when a specific one is removed.
If its does, its probably faulty.
  
Post #221256321st Feb 2021 2:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Chris1969
 


Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Alveston RedDiscovery 3

Thanks Pete πŸ‘πŸ»

Yeah think I need to get the codes read....

I've had the loom off and my meter out tonight and 3 of the sensors show the same ohms but one doesn't so I've swapped that one with a spare I had.

Hooked it back up and I'm still getting the same beep and flashing orange light when the car is in park....

So frustrating but I'm sure I will get there!
 .. still learning Surprised)

Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet.. 
 
Post #221269921st Feb 2021 8:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Prette
 


Member Since: 16 Mar 2020
Location: Previously Stoke-ST4 (pre-pandemic), Mostly The Hague (NL) partially Lyngby (DK) certainly somewhere
Posts: 160

2007 Discovery 3 TDV6 HSE Lux Auto Causeway GreyDiscovery 3

Since you were in Park, in theory the sensors should be off at this position.
Because you hear the long beep, could it be that when the car runs its self test it detects that the parking aid module is defective and it warns you?

I had similar issue when one of my front sensor was in short-circuit shutting down the whole module and beeping the rear (because the module was offline)
  
Post #221272521st Feb 2021 10:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Chris1969
 


Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Alveston RedDiscovery 3

So got the codes read during the week and showed errors for front and rear sensors. Think he said all said grounded to earth but I may be wrong haha.

Turns out it was the actual module that had gone down. Managed to swap it out for a working one and all good now I'm glad to say πŸ™‚πŸ‘πŸ»
 .. still learning Surprised)

Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet.. 
 
Post #221401327th Feb 2021 9:02 am
View user's profile Send private message View poster's gallery Reply with quote
Captain SlackBladder
 


Member Since: 18 Nov 2020
Location: Suffolk
Posts: 30

United Kingdom 2009 Discovery 3 TDV6 HSE Auto Santorini BlackDiscovery 3
Parking module?

Hi, did you have any other faults when your parking module went?

I only ask because I now have the dreaded Park brake fault, HDC fault, doors locking and unlocking etc. After reading here and somebody using a "Mac Tools" diagnostic tool and read the codes it seemed there was a fault with the rear sensors. That got unplugged but no change, the D3 wouldn't even start.

So from there we unplugged and changed the brake light switch hoping that was the cause after much reading on here, but it didn't fix the fault.

I was just interested to know if you had anything like that, as before mine packed up I would get odd beeps from the parking sensors when selecting reverse but nothing there, and just coming on randomly.

Thanks.
  
Post #22159988th Mar 2021 8:49 am
View user's profile Send private message View poster's gallery Reply with quote
Miguel MK VI
 


Member Since: 09 May 2017
Location: Lisboa
Posts: 8

Portugal 2005 Discovery 3 TDV6 Base 7 Seat Manual Bali BlueDiscovery 3

Hi,
My sensors don't work at all, and they brand new ones.
Back story, I was reversing and I went to a iron that is sticking from the ground and it made a hole on the back bumper, so the bumper as of the Disco for a while, wend i put it back in everything as working fine but the buzzing noise as a bit different, after a while they stopped working completely, and wend you check the them only one as clicking, order new ones set of 4, change them and they simply don't work, traded to put the hold ones and even the one it as clicking it stopped, any advice?
  
Post #22290258th May 2021 4:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Prette
 


Member Since: 16 Mar 2020
Location: Previously Stoke-ST4 (pre-pandemic), Mostly The Hague (NL) partially Lyngby (DK) certainly somewhere
Posts: 160

2007 Discovery 3 TDV6 HSE Lux Auto Causeway GreyDiscovery 3

Miguel ,

what is the error code you are having? Perhaps you need to clear the fault first to see what is the problem. Sometimes, clearing the error codes solves the issue.

Abraço e boa sorte
  
Post #222932810th May 2021 10:52 am
View user's profile Send private message View poster's gallery Reply with quote
Miguel MK VI
 


Member Since: 09 May 2017
Location: Lisboa
Posts: 8

Portugal 2005 Discovery 3 TDV6 Base 7 Seat Manual Bali BlueDiscovery 3

Pretty

Thank for the reply.

There are no error cods coming up, there is no sound and the light for the parking sensor keeps flashing.
Obrigado
  
Post #222933710th May 2021 11:25 am
View user's profile Send private message View poster's gallery Reply with quote
Prette
 


Member Since: 16 Mar 2020
Location: Previously Stoke-ST4 (pre-pandemic), Mostly The Hague (NL) partially Lyngby (DK) certainly somewhere
Posts: 160

2007 Discovery 3 TDV6 HSE Lux Auto Causeway GreyDiscovery 3

It is strange that no error code is being thrown by the PDC module.

Which diagnostic tool are you using to read the codes?

Anyway, if there is no sound. replace the speaker (you can measure it first as Pete suggested).
  
Post #222933810th May 2021 11:30 am
View user's profile Send private message View poster's gallery Reply with quote
Huge Halford
 


Member Since: 30 May 2013
Location: West Midlands
Posts: 275

England 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Chris1969
Where was the module ?? I am having the same fault.
 Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors

To do list:-
Waxoyl the Underside. 
 
Post #223166721st May 2021 7:13 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site