DISCO4.COM - View topic - Odometer error

Advertise on DISCO4.COM

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO4.COM > In Car Electronics (D3)

Odometer error

Page 1 of 1

EVAD

Member Since: 15 Jul 2021
Location: England
Posts: 6

2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver

Odometer error

Hi all. Heeellllpp!! Having trouble with my odometer .Instead of showing the mileage it says “error”
I have taken it to an auto electrical guy. He said I think new cluster needed but not sure.🤔
If anyone could tell me of any reason for this happening or maybe an answer to fix it I’d relax a bit and enjoy the old girl.

15th Jul 2021 2:36 pm

rrhool

Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4523

2007 Discovery 3 TDV6 SE Manual Zermatt Silver

Fill in your profile, and car details. It'll help people to help you

Richard

D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.

Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone

15th Jul 2021 3:25 pm

NJSS

Member Since: 06 May 2009
Location: Catherington, Hampshire.
Posts: 10807

2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo Grey

Hello ......

Quote:
Fill in your profile, and car details.

15th Jul 2021 8:44 pm

EVAD

Member Since: 15 Jul 2021
Location: England
Posts: 6

Have completed the profile. Thanks for the heads up👍🏻

15th Jul 2021 9:05 pm

aja4x4

Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463

2005 Discovery 3 TDV6 SE Auto Zambezi Silver

You need to get the fault codes read.
post 2007 vehicles suffer from dry solder joints on the dash circuit board due to the use of lead free solder but pre 2007 circuit boards are ok but they can still suffer failures Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE

15th Jul 2021 10:03 pm

EVAD

Member Since: 15 Jul 2021
Location: England
Posts: 6

Odometer error

I had a breakdown service at home last month for an unrelated problem and they gave me these codes.
Not sure if any of these would be the problem. Any advice would be great thanks.

16th Jul 2021 5:55 am

Hardware

Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13020

2011 Discovery 4 3.0 SDV6 XS Auto Sumatra Black

Easier to read

EVAD wrote:

16th Jul 2021 6:16 am

parrafin23

Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681

2005 Discovery 3 TDV6 Commercial Auto Java Black

Just to answer Evads question. The Error you get in the ipac usualy comes from a faulty Chip inside the cluster. The ofendig chip is labeled 35080Vp. This chip Stores the Vin, Security and Miles.
When you get ERROR in the display its usualy that the ipac could not read the info from the chip.
I have a My08 d3 cluster here on the table that I have removed this chip and had a play with it to try and learn its contents, and I soldered it back in the cluster, but I was not able to connect 1 of the pins of the chip to the pcb. then i got ERROR in the ipac.. just as you. It might be a cracked solder joint or something.
I ordered a CH341a programer from fleabay and was able to read it

21st Aug 2021 9:42 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO4.COM is independent and not affiliated to Land Rover.