Budapest
Member Since: 02 Apr 2018
Location: Lancashire
Posts: 32
|
My brother in law has got the bug and just bought a 56 plate HSE full spec, parking sensors work, rear tail gate works, fridge works, voice control for phone ??? Mines 2008 and I didnt know it was a thing ! £2250 !!! Unbelievable he bought it from a friend who has moved to a disco 4.
One problem, I have instructed him not to use the park brake to avoid obvious problems but a little too late maybe, he had been using it but know it seems to be stuck off (maybe a good thing) the P is displaying on the dash but is flashing ??? Anybody got any ideas what a flashing P means ?? The park brake is definitely off ???
Thanks Paul
[img][/img]
|
21st Sep 2021 7:23 am |
|
|
Bazross
Member Since: 18 Apr 2020
Location: lans
Posts: 141
|
Just had this myself.
It could be a few things but it is likely that the release cable has been pulled where are you I'm in lancs
|
25th Sep 2021 9:18 pm |
|
|
Budapest
Member Since: 02 Apr 2018
Location: Lancashire
Posts: 32
|
Iam in Ormskirk the car in in Birmingham but comes up here quite often !!
|
25th Sep 2021 9:37 pm |
|
|
Bazross
Member Since: 18 Apr 2020
Location: lans
Posts: 141
|
I'm in rossendale.
It may either be stuck or unwound on the actuator in the module
Or the release cable pulled fo you hear it whir and click as the EPB is applied
|
25th Sep 2021 10:12 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
|
You should always use the handbrake not using it can lead to parts siezing up and when it does get used it will fail.
I think he needs to start by servicing and adjusting the rear parkbrake shoes, its no good working on the system if there not adjusted correctly.
http://www.disco3.co.uk/forum/topic52130.html Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
26th Sep 2021 7:01 am |
|
|