Member Since: 28 Jun 2022
Location: bradwell
Posts: 3
Electronic parking brake problem
Hi everyone
The disco 3 is a 2007 which the emergeny release had been pulled, i watched a video on here which involes taling the front cover off and with a screwdriver manully winding the mech back out to relatch, now with that being done when i go to pull the parking brake on the epb still tries to unwind the cables untill the motor comes off its threads.
28th Jun 2022 4:49 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13996
Hi
Don’t know if you’ve seen it but this is a very good thread
Member Since: 28 Jun 2022
Location: bradwell
Posts: 3
Thanks for replying,
I have seen this thread this is where i got the info from for winding the mech back, but after i did this when i pull the handbrake switch on the motor winds itslef off the thread as if its takimg the handbrale off. I have no idea why its doing it
28th Jun 2022 8:06 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13996
My pleasure
As a starting point , Have u physically checked the end of the cables where they attach to the EPB shoes plse, ensured shoes have been adjusted correctly , or maybe one of the cable have snapped
Know there are some extremely knowledgeable members here who can guide u better than myself
In the mean time I just thought if u plug it into diagnostics it may give u some indication of why the emergency release was pulled in the first place, do u get an amber or red warning light on the dashboard
Another thought is ur battery ok please , ie , with the engine off should be a min of 12.6 Vdc and relevant fuses tc have been checked
Last edited by gstuart on 29th Jun 2022 2:14 am. Edited 1 time in total
29th Jun 2022 2:00 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13996
Some more details for u as it mentions regarding D3’s that have a manual transmission
Member Since: 28 Jun 2022
Location: bradwell
Posts: 3
The emergency release was pulled due to the handbrake being jammed on which i think was poor adjustment on the rear shoes.
Once i manually unwound the the motor (which allowed the cables slacken off) i striped the rear brakes, made sure handbrake pivot levers are free on the shoes then rebuilt and adjusted them correctly,
Then when i go in a pull the hand brake on the motor just unwinds itself off the threaded rod in the motor, i cant get the handbrake to apply,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum