Member Since: 02 Dec 2008
Location: West Yorkshire
Posts: 670
Where is the suspension connector please
Good morning folks,
So my suspension is not leaking but refuses to go into any other mode that ride height and I have the amber suspension warning light.
Got codes C1A32 - Front right corner valve
C1A35.
I swapped the front right corner valve for another (not new) no change
Removed the FNS wheel and liner but cannot find the connectors that are prone to corrosion. When looking into the wheel arch I see 3 big connectors on the right that are secured with a 10mm nut.
Am I looking in the right place ?
Any other suggestions learned D3 folk
8th Feb 2022 8:39 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1786
You are looking in the right place. On 2007 and up models, they moved the connectors up behand the LH head lamp.
When you talk about corner valve, are you referring to the valve block attached to the rear of the bumper on the RH side.
11th Feb 2022 5:07 am
Matty 2332
Member Since: 02 Dec 2008
Location: West Yorkshire
Posts: 670
Thanks, yes the valve block on the front drivers side. Mine is a my2007 so should I be taking the headlight out?
11th Feb 2022 7:08 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1786
No, You can see the connectors easily
11th Feb 2022 8:18 am
Matty 2332
Member Since: 02 Dec 2008
Location: West Yorkshire
Posts: 670
Many thanks, the connectors must be those I initially found in the wheel arch positioned on the right as there is nothing in the vicinity of the headlight.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum