Member Since: 14 Jul 2012
Location: surrey
Posts: 121
Short roof rails - missing parts?
Morning, finally got around to try to fit some short roof rails to our GS, hate the look without them. Bought some from a local fella who was breaking one.
They came bit incomplete, and without the front gutter trims (he prob couldnt be **sed to get the treenails out lol).
So I cut mine. No dramas.
My question is - the front and rear "feet" look like they should locate somewhere as they have pins. Front ones seem to sit up off the gutter trims, I've masticked those and the rears for now. Any thoughts? Also, should there be spacers underneath the rails?
I have done a google etc but inconclusively, did watch the Powerful youtube vid about changing to extended rails but wasn't much help tbh.
Thanks
24th Feb 2022 1:24 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1832
From memory that short bit of gutter strip was held down with 3m tape - I don't think it was screwed in anywhere Stolen - D4 Loire Blue
D4 Bali Blue
24th Feb 2022 3:29 pm
Yankee_Rover
Member Since: 02 Jun 2021
Location: Seattle
Posts: 183
You are in luck, I just bought a set and had it on my counter to clean up. There is a spacer and plastic washer that go below the channel, and another washer above the channel. End end cap is retained into the rail with a small screw.
Hope this helps:
2008 LR3 HSE, 4.4L V8
24th Feb 2022 3:33 pm
jonnyboy54321
Member Since: 14 Jul 2012
Location: surrey
Posts: 121
Oh thanks for that - presumably theres a t30/spacer/retaining washer x 3 per rail?
I suspect i may be missing some gasket affair from the front feet too
24th Feb 2022 9:48 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14142
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
