ajmp87
Member Since: 30 Oct 2021
Location: Paris
Posts: 12
  
|
Hello,
I've turned my disco3 into an overlander.
Inside, I've kept only the driver's seat and one seat of the rear row.
Instead of the passenger seat, I have a small desk/table. The rear also has furniture.
So, after removing the front passenger seat, I'm getting an error related to the passenger seat airbag and belt pretensioner. This is normal because I disconnected the connector under the seat.
But does anyone know how to trick the car into thinking the seat is still present with the airbag connected? Should I simply bridge the connector, or do I need to use a resistor of X ohms?
It will be so helpful!
Take care!
|
 6th Sep 2023 2:41 pm |
|
|
ajmp87
Member Since: 30 Oct 2021
Location: Paris
Posts: 12
|
Found it !
To simulate the electric consumption of an airbag, we only need a resistor between 2.2 and 3 ohms (0.25W).
|
| 8th Sep 2023 12:27 pm |
|
|
