dan288
Member Since: 26 May 2012
Location: Essex
Posts: 302
  
|
Hello all, it's been a while since needing to pick your brains.
Today I replaced the brake servo ( booster ) and pipes. All went well apart from the auto won't shift up. Manually will let me go up and down the gears. Plugged my isoft in and cleared a bunch of codes. But now wont communicate with speed control module. Any ideas?
Thank you as always. Mods:
LR Chrome mirrors
De-tangoed,
LED rings in front lights,
Hids4u all external leds,
Rears removed,
D4 rear lights with hids4u reverse led,
Clear repeaters,
Side steps,
Mud guards,
Roof Rails - removed,
D4 Modded Grill,
20" stormers with grabbers,
EGR blanked and removed
Next: remap - BAS? Bluefin?
|
 20th Aug 2022 5:57 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10390
 
|
Did you unplug the abs multi plug ?
Check the brake light bulbs are working
|
| 20th Aug 2022 7:15 pm |
|
|
dan288
Member Since: 26 May 2012
Location: Essex
Posts: 302
|
Hi, thank you for your reply. After some frantic googling and asking the wife to to check if the brake lights were working. Then realised that she was confused.🙄 I noticed that they were on constantly and had read that cruise control issues etc were brake switch related. I took a torch to my brake pedal and saw the switch plunger was not touching the brake pedal. Got the courage together to undo the switch and fiddled with the plunger and refitted. Now all is well. Mods:
LR Chrome mirrors
De-tangoed,
LED rings in front lights,
Hids4u all external leds,
Rears removed,
D4 rear lights with hids4u reverse led,
Clear repeaters,
Side steps,
Mud guards,
Roof Rails - removed,
D4 Modded Grill,
20" stormers with grabbers,
EGR blanked and removed
Next: remap - BAS? Bluefin?
|
| 20th Aug 2022 8:14 pm |
|
|
