Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
D3 manual gearbox linkage.
Is it possible to change the manual gearbox linkage from inside the car?
I have my gearbox out at the moment to do the DMF, the clutch and the turbo. There is a bit of play in the linkage but I would like to get it all back together and check that it all works, before spending another £300 on the linkage.
14th Jan 2023 1:41 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
I don't believe so. Why do you need a whole linkage? The clips and seals are available separately.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
14th Jan 2023 1:43 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
The wear isn't in the pin with the o rings and the clip, below the lever. It seems to be in the joint further forward that attaches to the selector on the gearbox and possibly in the ball at the base of the lever.
14th Jan 2023 1:48 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
I notice that you have a 2.5 Pi. I have always liked them.
14th Jan 2023 1:49 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18468
If you haven't already, do the reverse detent circlip whilst the box is out.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
14th Jan 2023 1:51 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
GDM wrote:
I notice that you have a 2.5 Pi. I have always liked them.
I've had it 35 years now.
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
14th Jan 2023 1:54 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
Martin wrote:
If you haven't already, do the reverse detent circlip whilst the box is out.
Thanks. Will take a look at that.
14th Jan 2023 2:09 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
rrhool wrote:
GDM wrote:
I notice that you have a 2.5 Pi. I have always liked them.
I've had it 35 years now.
Very nice. Emerald Green? That's a long time to own a car. I used to have a 150 BHP TR6, they are so smooth and tourqey those engines. I also had Dolomites when I was younger and I bought another one about 3 years ago in which I am fitting Nissan turbo engine and 5 speed gearbox.
14th Jan 2023 2:14 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
Yes, Emerald Green. I've had a Herald and a GT6 in the past, I did dabble with Dolomites, always fancied a Sprint. I like the idea of modern engines in older cars, a turbo engine and 5 speed could work very well! Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
14th Jan 2023 2:34 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
I bought a Sprint in 1989. I re-built the engine, ported the head and fitted a different cam and it went really well.
Here's the Nissan engine in the current Dolomite. Hoping for about 230 BHP with the custom manifold, better fuel pump, FMIC and a chip.
14th Jan 2023 3:42 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
Nice Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
14th Jan 2023 5:18 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
Sorry, I nearly forgot that this wasn't a Triumph forum.
Back to my Discovery....what is the flywheel bolt torque figure?
14th Jan 2023 11:44 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
45Nm then 45° then 45°
Best to get new bolts
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Jan 2023 12:31 pm
GDM
Member Since: 18 Oct 2020
Location: Midhurst, West Sussex
Posts: 144
Thanks Richard. I have bought new bolts. I don't suppose you know the clutch to flywheel bolt torque too?
Last edited by GDM on 15th Jan 2023 7:47 pm. Edited 1 time in total
15th Jan 2023 7:03 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4409
25Nm Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I've had it 35 years now.
