Member Since: 16 Oct 2019
Location: Fareham
Posts: 24
Inlet leak??
Hi,
I have noticed what seems to be a blown seal and evidence of a leak. Is this air going in to the inlet? The car doesn’t go in to limp mode so not noticed before. Is it easy enough to replace the seal? If so what’s the part called?
Any help gratefully received.
29th Oct 2022 10:15 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi
Apologises as wasn’t sure if u had the 2.7 D4 or 3.0 , think there the same
Does help if u put silicone grease on the seals along with getting some cleaner for the Map sensor as they are renowned for blocking up , not wishing to try and teach j how to suck eggs, don’t poke anything down the end of the map sensor , use some brake or carb cleaner
Isn’t a difficult job just need to be careful removing the throttle body , also ideal time to clean inside
Also have to be careful getting the front large clip back into place , need 3 x seals, 2 x at the Y and one at the front
Will also need some pliers to unclip the EGR pipe clips , enclosed a link
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
