| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
  
|
What is the quantity of coolant in the system to calculate the amount of antifreeze needed when replacing the coolant? It can when others can't,
It will when others won't,
It goes where others don't.
|
 31st Oct 2022 9:19 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
  
|
Premix it, then no issues, capacities always seem to be quoted for dry fills, so are a guess at best.
|
| 1st Nov 2022 4:37 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
 
|
Yes, mix it 50/50 antifreeze/water in a can (assuming this is the ratio used previously) Can’t speak for the diesel but it’s very difficult to get all coolant out from the V8, believe me I really have tried.
|
| 1st Nov 2022 8:01 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
I always use premix as it will last longer due to it using distilled water in the make up , Luckily we always have CAT premixed about .
|
| 2nd Nov 2022 6:59 am |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
|
Premix is 50 percent water, that I am sure you know, but I am not paying for water.
I have heard the legends about distilled water v tap water, and can say I have worked on hundreds of vehicles over the years, and all they get is coolant/tap water 50/50.
|
| 2nd Nov 2022 2:16 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13022
|
I'd suggest use of tap water should be determined by where you live. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 2nd Nov 2022 3:12 pm |
|
|
Moleshome
Member Since: 15 Oct 2020
Location: Wokingham
Posts: 412
|
I'd suggest that in a commercial environment choice of pre-mixed, distilled water or tap water will be governed by what's cheapest not by local water hardness.
|
| 2nd Nov 2022 3:22 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
|
Thanks for the info guys, next dilemma, I have just fitted a none genuine replacement coolant bottle and although in the past I’ve given information on how to bleed the cooling system, following the same instructions can I heck as like get the heater to blow hot, is it possible for the replacement bottle to cause this? It can when others can't,
It will when others won't,
It goes where others don't.
|
| 2nd Nov 2022 6:05 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
|
I understand your sentence as “there isn’t any heat coming after I replaced the coolant”. Is this correct?
If so, you have an airlock.
Doubt the bottle is at fault but of course it is POSSIBLE… the V8 is close to impossible to bleed properly unless you engage in pagan rites, blood sacrifice, align the vehicle so the front is higher than the rear, spend a lot of time, etc. etc. I thought the diesel was easier  
|
| 3rd Nov 2022 5:42 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
