Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > IIDTool Help

detecting previous engine tuning?
Post Reply  Down to end
Page 1 of 1
Fuxl
 


Member Since: 29 Jul 2020
Location: Kirchstetten
Posts: 96

Austria 2006 Discovery 3 TDV6 HSE Auto Belize GreenDiscovery 3
detecting previous engine tuning?

Hi

A couple of months ago I changed the main bearings and Big end bearings on my 2.7 tdv6.

Yesterday a mechanic saw the pictures of my big end bearings and told me that a wear like this would indicate a to early ignition of the fuel. (same on gasoline and diesel engines)

Click image to enlarge


He meant that maybe there was a bad engine tune done before I got the car. And this causes the wear.

Is it possible to detect a previous engine tune with the gap tool?
Or compare engine values like opening and duration of the injectors?

My engine does start to knock again on one big end bearing after just 5000km. Confused

best regards Roland
  
Post #23135424th Nov 2022 6:27 am
View user's profile Send private message View poster's gallery Reply with quote
disco chris
 


Member Since: 25 Apr 2022
Location: London
Posts: 281

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Hi Roland

I'm not sure on the answer, hopefully someone will come along soon with a bit of knowledge, but out of interest what prompted you to change the bearings? What mileage is your D3 on?

Chris
  
Post #23135494th Nov 2022 7:57 am
View user's profile Send private message View poster's gallery Reply with quote
nebc100
 


Member Since: 20 Sep 2017
Location: Altlinster
Posts: 420

Luxembourg 

It is certainly possible to see if the engine has already been tuned... Just not sure if IID can do it.

The ECU has a counter of the number of times that it has been programmed.
  
Post #23135584th Nov 2022 8:45 am
View user's profile Send private message View poster's gallery Reply with quote
Motolab
 


Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820

Netherlands 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3
Re: detecting previous engine tuning?

Fuxl wrote:


Yesterday a mechanic saw the pictures of my big end bearings and told me that a wear like this would indicate a to early ignition of the fuel. (same on gasoline and diesel engines)

Click image to enlarge


He meant that maybe there was a bad engine tune done before I got the car. And this causes the wear.



hi Roland, i have had 3 TDV6 engines apart now..... 2 from a LR and 1 out of a JAG

the ALL have the same wear spots (without the black debris though) , in relation to the running hours

this would meant they ALL had a "tune"?? scientifically are 3 engines, randomly opened not waterproof by far.... BUT until proven otherwise i tend to not believe that claim/suggestion of that mechanic..for now..

i have published a picture with 120000 km difference between 2 of them them.. before

here is it again to compare...


Click image to enlarge


but what is that black debris in the shells? if that works like emerypaper....
 Best regards
Harold

Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year

Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc. Wink 
 
Post #23135624th Nov 2022 9:00 am
View user's profile Send private message View poster's gallery Reply with quote
Fuxl
 


Member Since: 29 Jul 2020
Location: Kirchstetten
Posts: 96

Austria 2006 Discovery 3 TDV6 HSE Auto Belize GreenDiscovery 3

disco chris wrote:
Hi Roland

I'm not sure on the answer, hopefully someone will come along soon with a bit of knowledge, but out of interest what prompted you to change the bearings? What mileage is your D3 on?

Chris


Low oil pressure. 200000km


ok, thats a good point. all of them have the same wear, so it wont be a tuning thing.

You already helped me.

I will report about my further investigations about my "knocking" sound in an extra thread.

best regards
Roland
  
Post #23135654th Nov 2022 9:39 am
View user's profile Send private message View poster's gallery Reply with quote
disco chris
 


Member Since: 25 Apr 2022
Location: London
Posts: 281

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Assuming you've changed the oil pump for a good one?
  
Post #23135674th Nov 2022 9:55 am
View user's profile Send private message View poster's gallery Reply with quote
Fuxl
 


Member Since: 29 Jul 2020
Location: Kirchstetten
Posts: 96

Austria 2006 Discovery 3 TDV6 HSE Auto Belize GreenDiscovery 3

Laughing

This car is a long story. In short, I have changed following parts in the last 5000km:

HighPressureFuelPump
all 6 injectors (twice, because after the first time the car caught fire)
all 6 glow plugs(twice, because the first ones where cheap ones)
timing belts front and rear (twice, because of the fire)
timing chains and tensioners
waterpump
oil pump (FAI)
Main bearings and big end bearings
all the turbo hoses

And I use 10W40 oil.

Still knocking in idle when warm.

And one thing that I couldn't change are the camshaft bearings. they are worn out. but the camshafts are running directly in the heads. so I would have to change them with the camshafts.

a never ending story Laughing

But.....SWMBO loves this car!
She never drives it, because its always broken, BUT she loves it. Mr. Green
  
Post #23135684th Nov 2022 10:15 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site