Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
charlietortoise
Member Since: 29 Oct 2011
Location: Staffordshire
Posts: 511
|
Hi, I have had my gearbox and torque converter refurbished. All has been well until last week, so around 2000 miles.
I reverse off my drive and up a steep hill, in a manual car you slip the clutch and keep the revs up and move slowly. If your foot were to slip off the clutch then suddenly you will have direct drive and the car will lurch away.
On the auto the torque converter acts as a clutch and slips and you move slowly and the revs keep up. The problem is that suddenly the converter locks up and you lurch off, akin to slipping your foot off the clutch.
There is nothing in the gearbox fault codes. It is all clear
So I have had a look and there is an electronic lock up and unlock system. I am wondering if anyone can shed light on this it has experienced something similar.
Thanks Discovery 4 3.0 HSE 2010 year. I like it a lot. Now with winch 😂
|
5th Dec 2022 5:05 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
Before I messed with it I would be talking to the guys who did the refurb as im guessing it came with some sort of warranty?
|
6th Dec 2022 7:08 am |
|
|
charlietortoise
Member Since: 29 Oct 2011
Location: Staffordshire
Posts: 511
|
Yes I am talking to them. But they had my car for 45 days, excuse after excuse. I dont have any faith in them and really I dont want them to ever touch it again. Discovery 4 3.0 HSE 2010 year. I like it a lot. Now with winch 😂
|
6th Dec 2022 9:49 am |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
Well I would be talking to a specialist ZF agent as they are pretty bombproof if looked after correctly ,sometimes you just have to suck up the cost.
It maybe a good idea to get an oil sample from the box as they can test for contaminants that will indicate if something has failed internally.
|
7th Dec 2022 7:22 am |
|
|
thisandy
Member Since: 28 Jan 2018
Location: Pembrokeshire
Posts: 308
|
You could try to reset the transmission adaptive values and see if it makes any difference
|
7th Dec 2022 4:25 pm |
|
|
disco chris
Member Since: 25 Apr 2022
Location: London
Posts: 288
|
I second resetting the transmission adaptive values. Should be simple to enough to do and I believe non invasive / expensive...
|
7th Dec 2022 4:58 pm |
|
|
charlietortoise
Member Since: 29 Oct 2011
Location: Staffordshire
Posts: 511
|
I considered that, I have an iid so can do it, I wanted the gearbox company to have a chance first. To add, a bit of experimentation. Gearbox cold first start, reverse off drive. Lockup happens. When warm, exactly the same manoeuvre no problem. This morning gearbox cold, drove off forward and up the hill. No problems Discovery 4 3.0 HSE 2010 year. I like it a lot. Now with winch 😂
|
8th Dec 2022 8:29 am |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.