Member Since: 17 Sep 2019
Location: Glossop
Posts: 131
Amk compressor mounts
Hey everyone, I’ve been getting an error message on the D4 the last few times of use of standard height only. Now I’ve noticed for a while that the compressor seems a little slow so after a check on the gap tool I’m hoping the compressor just needs a service and valve block cleaning. I’ve also noticed that the mounts that hold the compressor seem to be worn/loose. I have tried to find replacement parts but it’s looking like after Christmas (eBay) but I would like to get said job done over the Christmas. Does anyone know a part number or anywhere I can get them from a little quicker? Thanks Colin
2015 D4 HSE Loire Blue
12th Dec 2022 10:26 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Member Since: 11 Oct 2022
Location: Bolton
Posts: 29
£70.... for a rubber mount.. That's f ridiculous..
Even the £30 e-bay option seems a lot especially when the postage is added
Assuming the bolts / springs that are existing can be reused the cost of the rubber will be pennies..
Is this a common problem?Up a creek...now where have I stashed the paddle
12th Dec 2022 11:13 am
SpiderBaby D3 Decade
Member Since: 21 Sep 2007
Location: Liverpool
Posts: 1411
Not tried it myself and it's just a wild thought but since worn prop shaft rubber mounts are commonly repaired with Sikafix or similar (search on here for more info) maybe you could do similar as a temporary fix?
Obviously you make your own decisions and take responsibility for your own actions etc etcI see no ships........
12th Dec 2022 11:25 am
Pimpintgepidge
Member Since: 17 Sep 2019
Location: Glossop
Posts: 131
Yes they are steep! I do have a box or 2 with all sorts of bits in, maybe I can make something. Thanks for your help…2015 D4 HSE Loire Blue
12th Dec 2022 11:57 am
Pimpintgepidge
Member Since: 17 Sep 2019
Location: Glossop
Posts: 131
The more I look at the picture the more it looks like the bolts were never tightened properly because surly if they were worn that much the rubbers would have disintegrated. I will investigate more when the service kit comes.2015 D4 HSE Loire Blue
12th Dec 2022 11:59 am
Admirable
Member Since: 19 Jul 2015
Location: Fife
Posts: 1039
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 806
Re: Amk compressor mounts
Pimpintgepidge wrote:
Hey everyone, I’ve been getting an error message on the D4 the last few times of use of standard height only. Now I’ve noticed for a while that the compressor seems a little slow so after a check on the gap tool I’m hoping the compressor just needs a service and valve block cleaning. I’ve also noticed that the mounts that hold the compressor seem to be worn/loose. I have tried to find replacement parts but it’s looking like after Christmas (eBay) but I would like to get said job done over the Christmas. Does anyone know a part number or anywhere I can get them from a little quicker? Thanks Colin
supposed to be like that new ones will be the same
edit:- there are springs under them so they can go up and down to support the compressorplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum