Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D4)

2nd Oil change after rebuild - some sparkles?
Post Reply  Down to end
Page 1 of 2 12>
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4
2nd Oil change after rebuild - some sparkles?

So second oil change following engine rebuild.

New internals and block rehoned.

Done around 2kmiles and 1st oil chg around 1k miles ago.

Found very small pieces in filter. Some look like 2mm long strands of very fine hair (machining debris?) and some other bits maybe around max 1mm^2.

Pieces are magnetic.

Maybe 20 or so scattered across filter in total.

Is this normal during bedding in or is it terminal?

Almost too small to take pics but will add some here
  
Post #23249701st Feb 2023 4:05 pm
View user's profile Send private message View poster's gallery Reply with quote
rrhool
 


Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4524

United Kingdom 2007 Discovery 3 TDV6 SE Manual Zermatt SilverDiscovery 3

Was the block cleaned properly after the bores were honed? What else was machined?
 Richard


D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.



Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone 
 
Post #23249711st Feb 2023 4:09 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

I cant say how well it was cleaned … but from my experience with this hack job I am surprised I did not find some bolts in the filter.

Heads were also rebuilt new valves etc

[img]https://www.disco3.co.uk/gallery/albums/userpics/25081/normal_371A5EDC-2460-439F-8436-5DBD279B8689.jpeg[/img]

[img]https://www.disco3.co.uk/gallery/albums/userpics/25081/normal_8AA93A5E-FACB-4389-8A77-44F423EA2E28.jpeg[/img]

[img]https://www.disco3.co.uk/gallery/albums/userpics/25081/normal_F9D41FB5-568D-492D-8762-7D4FE74C93E6.jpeg[/img]

[img]https://www.disco3.co.uk/gallery/albums/userpics/25081/normal_9F8398D7-E85A-47F3-AAD3-BB729AD4970D.jpeg[/img]
 

Last edited by stevebez on 1st Feb 2023 4:27 pm. Edited 1 time in total 
Post #23249721st Feb 2023 4:11 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

Cant seem to get photos to embed themselves !?!
  
Post #23249731st Feb 2023 4:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Admirable
 


Member Since: 19 Jul 2015
Location: Fife
Posts: 1039

Ukraine 2007 Discovery 3 TDV6 XS Auto Zermatt SilverDiscovery 3







  
Post #23249751st Feb 2023 4:45 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

Thanks!
  
Post #23249851st Feb 2023 5:11 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

What we think gents … do another 1000miles and check filter again?
  
Post #23250261st Feb 2023 8:44 pm
View user's profile Send private message View poster's gallery Reply with quote
NJSS
 


Member Since: 06 May 2009
Location: Catherington, Hampshire.
Posts: 10808

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo GreyDiscovery 4

Who did the engine rebuild please? I have posted this question in your other thread:-

https://www.disco3.co.uk/forum/replaced-co...58-15.html

On 17th April 2022 in that thread CIO wrote:-

Quote:
Who did the rebuild?



Your response on the same day was:-
Quote:
At this stage Id rather not say as we still in the phase of rectifying some “issues”.


Presumably those issues have now been resolved; can you please now tell us who did the rebuild; and your options regarding the job?

NJSS
  
Post #23250291st Feb 2023 8:48 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

PM me …

The issues have been ongoing and car is out of its 6m warranty.

Less said at this stage the better. Genuinely wish I did the job myself.
 

Last edited by stevebez on 1st Feb 2023 10:19 pm. Edited 1 time in total 
Post #23250481st Feb 2023 10:09 pm
View user's profile Send private message View poster's gallery Reply with quote
sja
 


Member Since: 15 Mar 2022
Location: england
Posts: 4

United Kingdom 

Yes it would be very welcome news who did the engine recon.
It may save fellow members a lot of future potential heartache
  
Post #23250501st Feb 2023 10:12 pm
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

If any individual wants to know do PM but honestly don't want ANYTHING further to do with this crowd least of all litigation.
  
Post #23250531st Feb 2023 10:21 pm
View user's profile Send private message View poster's gallery Reply with quote
sja
 


Member Since: 15 Mar 2022
Location: england
Posts: 4

United Kingdom 

If you could pm me the details, it would be appreciated
  
Post #23250551st Feb 2023 10:29 pm
View user's profile Send private message View poster's gallery Reply with quote
popsdosh
 


Member Since: 09 Nov 2009
Location: cambs
Posts: 442

United Kingdom 2016 Discovery 4 3.0 SDV6 Graphite LE Auto Corris GreyDiscovery 4

To be honest have you still got the oil that was removed? Getting that tested would give you an idea of where the issue is as the levels of the metals within the sample can point you to a failing component .

I would only ever contemplate using as factory rebuilt engine as the engine is
too vulnerable to mistakes in rebuilding and the factory rebuilt are as good as, if not better than the original
with 2yr parts and labour peace of mind.

Out of interest were the turbos renewed or at least checked out at the time?
  
Post #23250902nd Feb 2023 6:39 am
View user's profile Send private message View poster's gallery Reply with quote
stevebez
 


Member Since: 18 Apr 2011
Location: Kent
Posts: 87

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Ipanema SandDiscovery 4

Yes new turbos - well cartridges at least.

Get your point on factory rebuilt - tbh didnt think that was an option - LR wanted to drop in a new motor (as they do).

I still have the oil - ill have it looked at - will send to “The Oil Lab” - anyone used them before?

(Btw these suction oil removers are really great)
  
Post #23250912nd Feb 2023 7:00 am
View user's profile Send private message View poster's gallery Reply with quote
popsdosh
 


Member Since: 09 Nov 2009
Location: cambs
Posts: 442

United Kingdom 2016 Discovery 4 3.0 SDV6 Graphite LE Auto Corris GreyDiscovery 4

They dont have any new motors full stop ,all you can get are factory rebuilt . If the main dealers tell you they are new its a lie.All the new ones were gone long ago.
  
Post #23251942nd Feb 2023 6:19 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site