Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
Missing cover plate
Hi all
Been having a stiff auto gearbox lever on Discovery 4, (2010) ordered the parts, got underneath to find the cover plate that should be there wasn’t, replaced parts and all good, question, is this plate common to the disco 3 and 4, there doesn’t seem to be many D4s being scrapped close to me and wondered if D3 was the same part, thanks.Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
9th Jan 2023 3:16 pm
zig
Member Since: 09 Sep 2005
Location: Scotland
Posts: 648
They are different. I have a D3 on which it is missing and I had looked at fitting a D4 one. However, I came to the conclusion that they were not essential.
10th Jan 2023 11:17 pm
davecars
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
Thanks Zig
Thought so, Given the weather up here I think it is needed as my pivot for the gearbox was totally seized, probably by salt, due to the cover being missing, will try and find one, unless someone on here is scrapping a D4 2010 🤞Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
11th Jan 2023 11:20 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi
Does this help u regarding the transmission cover plate part numbers
There is one on eBay but assume it’s vin related , also see them quoting that one hole is larger than the others, so imagine a larger washer might resolve the issue
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
Hi gstuart
Thanks for the info, I was of the opinion that the missing plate is a plate and not a heat shield, I have access to another D4 (2010) so Im going to take a look underneath and report back, again thanks.Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
12th Jan 2023 3:16 pm
DN D3 Decade
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2345
davecars, the D3 ‘plate’ (which is a type of plastic), does have a heat shield on part of it, where the catalytic converter is above it, I assume the D4 has similar.D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
12th Jan 2023 3:28 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
davecars wrote:
Hi gstuart
Thanks for the info, I was of the opinion that the missing plate is a plate and not a heat shield, I have access to another D4 (2010) so Im going to take a look underneath and report back, again thanks.
Ur so welcome and great it helped , must confess did think it was some type of heat plate
Many thks @DN for confirming that and good to know
12th Jan 2023 10:15 pm
davecars
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
Morning all
Had a look under the other D4 and guess what, no cover plate see photo, you can see the brackets where you bolt on to ?
I’m thinking it might be plastic
Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
