Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
Left EGR cooler
Hi guys does anybody know if the pipe on the cooler has a gasket or o ring? (See picture)
I have a leak from the pipe on the cooler. There is a small torch screw holding the pipe to the cooler.
Thanks for any advice. ...........One life live it..........
20th Mar 2023 7:04 pm
Brooksie69
Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
Sorry picture in my gallery of the egr cooler............One life live it..........
20th Mar 2023 7:06 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
Thanks. I have looked everywhere but there is no information on how the tube seals against the cooler. Is it factory fit? Gasket or o ring. I have removed the torx and the tube is removable but there wasn't any liquid seal thus the leak.
...........One life live it..........
20th Mar 2023 7:24 pm
SeanZwissler
Member Since: 16 Sep 2018
Location: Ludwigsburg
Posts: 21
Hallo from germany
I have the same problem, i removed the pipe forn changing the valvecover. Now it loosing Coolant, there is no gasket, i think its factory fitted or glued and normaly not removable. I think the only solution is a heat resistant "sikaflex" its called in germany.
cheers
Sean
20th Mar 2023 7:30 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Apologises as I’m not sure, hopefully someone else that knows these better will be able to advise u better
20th Mar 2023 7:44 pm
Brooksie69
Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
Sean I guessed so. I have used a engine block sealer so hopefully when set this seals. Thank you............One life live it..........
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
