Member Since: 04 Sep 2009
Location: Almunge
Posts: 170
[Wanted] EPB module electronics
As the park brake module disturbs the HS-CAN bus when connected on my sons D3, I would rather replace only the electronics, not the entire module.
So if you have an old module with broken gears or motor for a D3 or RRS 05-09 that you don't need, please let me know.
Defender 110 SE 2021, Tasman Blue
Discovery 1 V8 ES 1997, Epsom green
Discovery 3 V8 HSE 2006, Bonatti Grey
Range Rover V8 1983, Sierra Silver
23rd Apr 2023 7:08 pm
1784
Member Since: 04 Sep 2009
Location: Almunge
Posts: 170
I've managed to find a used circuit board now and with that was able to restore EPB to working normally.Defender 110 SE 2021, Tasman Blue
Discovery 1 V8 ES 1997, Epsom green
Discovery 3 V8 HSE 2006, Bonatti Grey
Range Rover V8 1983, Sierra Silver
9th May 2023 3:56 pm
Mr E
Member Since: 21 Aug 2017
Location: Gods county
Posts: 58
great work!
Was it just a water damaged board?
9th May 2023 6:26 pm
1784
Member Since: 04 Sep 2009
Location: Almunge
Posts: 170
I was not able confirm any visible damage to the old board, but I did not examine it in great detail. It was clearly not doing what it should on the HS-CAN. When the module was bypassed all was OK. I also confirmed power to the module etc before concluding it must be broken.Defender 110 SE 2021, Tasman Blue
Discovery 1 V8 ES 1997, Epsom green
Discovery 3 V8 HSE 2006, Bonatti Grey
Range Rover V8 1983, Sierra Silver
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
