| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
4play
Member Since: 24 May 2020
Location: Shropshire
Posts: 35
  
|
| 2014 8 speed shift lock fault. |
|
Hi folks, my shift lock has stopped working and I need to know if it’s the solenoid or PCB. Is there anyone in the North Shropshire/ South Staffordshire area that has the diagnostic tool who would be prepared to let me visit them and get the fault codes read please? It would be most appreciated. Thanks Paul.
P.S. I live near Newport TF10 area.
|
 27th Oct 2023 7:46 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
|
By “shift lock” DP you mean rotary switch? It can when others can't,
It will when others won't,
It goes where others don't.
|
| 28th Oct 2023 8:22 am |
|
|
4play
Member Since: 24 May 2020
Location: Shropshire
Posts: 35
|
Yes, the locking part of the rotary selector that is operated by a solenoid, that prevents rotation unless you have the brake depressed. I have had to disable the function temporarily. I don’t think that the soienoid is available as a replacement part or could easily be repaired, which means a new complete selector switch/module. £300-500 ish cost. If it’s the PCB there are several places that do a refurb for the lower price. Or possibly a used working one but difficult to know if it’s any good on purchase. Thanks.
|
| 28th Oct 2023 10:23 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
|
The rotary switch is known to fail, I too had to disabled the lock part to keep mobile, I got one off eBay for about £25 but it was about 5 years ago, apparently it’s a transistor in the switch that fails. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 28th Oct 2023 2:02 pm |
|
|
Simmo73
Member Since: 23 Jan 2019
Location: East Sussex
Posts: 21
|
My gear selector failed recently on my Discovery 4 so I sent it off to ECU Testing. Great company that was easy to use and professional. Turn around was about a week and it comes with a lifetime warranty. Was £320 all in. Much cheaper than a new one and with a great guarantee.
|
| 28th Oct 2023 2:27 pm |
|
|
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 546
 
|
I too can vouch for ECU Testing
|
| 29th Oct 2023 7:26 am |
|
|
4play
Member Since: 24 May 2020
Location: Shropshire
Posts: 35
|
Thanks for the help so far.
jackvoyager posted on the 21st November 2022 11.48 that he had replaced 2 100 ohm resistors on the PCB for a couple of quid and this had fixed it. I am going down that route first by approaching a local electronics expert to do the job and see what happens. Thanks again to everyone including Jack.
|
| 4th Nov 2023 2:00 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
