I have tried to search and not came up with much for what I’m looking for. Apologies if this has been asked before.
Is there a list of all the parameters for the live values on the GAP IID tool? I’m not looking for anything in particular. I just like to monitor and explore the live values, but for the majority, I have no idea if they are within normal ranges etc.
I can particularly value ranges from the search box, but would be handy to have spreadsheet of all in one place.
Member Since: 06 Mar 2017
Location: Lost
Posts: 5043
There is unfortunately no exhaustive list of "live value" parameters, and for diagnostic purposes you need to refer to the workshop manual or Topix. Perhaps that's one reason why forums such as this are able to exist as this type of info is held in the collective, either from knowledge, experience, or both.
In any case, such a list would be massive given the number of systems and components!
Some diagnostic tools do provide a correct value window alongside the "live value" such as higher level Bosch KTS, but this is pro workshop equipment as is very expensive. (it can also sometimes be wrong too )
Generally speaking you can take it as a given the live data you are looking is correct and within spec. Unless, you have fault codes logged for the value/component you are looking at.
And then there is the old adage, "if it aint broke" yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
