Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D4)

Solder Joints in passenger footwell
Post Reply  Down to end
Page 1 of 1
alex0264
 


Member Since: 16 Apr 2012
Location: Taunton
Posts: 136

United Kingdom 2016 Discovery 4 3.0 SDV6 HSE Lux Auto Scotia GreyDiscovery 4
Solder Joints in passenger footwell

I recently learnt that somewhere on the wiring loom in the footwells, there are some solder Joints. I've done several searches but cannot seem to find anything - I'm trying to find out exactly where these are on the loom. Currently (still) trying to resolve suspension issues and today when moving the loom on the passenger side (which had been previously soaked), I managed to get a click from the rear valve block - twice. I've peeled back the covering to the loom as far as the back of the passenger seat, but then it disappears into some kind of conduit. Could the joint be in there?

Honestly, I feel like I'm so close yet so far off. I know I've been told I'm chasing my tail with this, but this is absolutely 100% an electrical issue. I'm wondering if paying for a couple of hours of an auto electricians time might be worthwhile. Perhaps they can check resistance etc and highlight the culprit.
  
Post #23546711st Dec 2023 9:45 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site