pjlcar
Member Since: 12 Jan 2021
Location: Enfield
Posts: 45
  
|
Hi all
Has anyone replaced their door release cable - photo below - and could give me some tips on how to do it without dismantling too much? The door card is off and it’s easy to unclog from the internal door handle end, but less obvious how it attaches to the lock the other end. Any tips appreciated.
Kind regards, Peter
|
 26th Sep 2023 3:33 pm |
|
|
andyinderby
Member Since: 18 Jan 2024
Location: Derbyshire
Posts: 2
|
Hi Peter
I’ve had the same issue! Did you get anywhere with it? I’m baffled atm as to how to replace this.
Any tips?
Kind regards
Andrew
|
| 21st Jan 2024 3:11 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1664
|
It seems that people have attempted it. Here's a link to a thread on a similar subject. Might be useful. There is other information on the site and on Youtube about how to dismantle the door to get at it all, soi do a search, if you feel like having a go.
https://www.disco4.com/forum/topic200284.html
Also worth filling in your car spec and year to give people a chance to help you with the correct information for your model. Good luck and keep us posted, that's how we all learn.
Cheers Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 21st Jan 2024 3:23 pm |
|
|
andyinderby
Member Since: 18 Jan 2024
Location: Derbyshire
Posts: 2
|
Thanks Gary. I’d taken door panel off to inspect rattling speaker. Snapped the white fitting whilst doing so. Your link has been helpful and it’s evident it’ll be a challenge to fit!!
I’ve got Disco 4 HSE lux 13 plate.
I’ll post back on here once complete.
Cheers
Andrew
|
| 21st Jan 2024 4:18 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1664
|
No problem. Here’s a thread for an older car that has a lot more detail that might help (go to the start of the thread).
https://www.disco4.com/forum/topic33743.html Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 21st Jan 2024 5:38 pm |
|
|
