Member Since: 18 Jul 2020
Location: Newton Abbot, DEVON
Posts: 24
Wheel rim wear
I have had a slow puncture for weeks now and it was starting to get annoying so finished early yesterday and went to get it sorted. Into the big bath no bubbles nothing obvious. Tyre removed small nail through the middle happy days easy repair. But NO ! The inside of the inner rim was worn in quite sharp grooves by the tyre bead. The manager very experienced said he has only seen it on Volvo XC 90's and didn't know the cause.
I run permanent full weight ie 3260Kgs rotate the wheels regularly corner to corner and across the car in between so I can only assume all the wheels will have the same damage. I run 48psi in the rears and 42psi in the front ie 5 psi above the heavy load on the tpms tyres are Pirelli AT+ very good tyres all round.
Anyone any ideas whats chewing the inside of the rims up ??
Also if anyone knows where to get more Pirelli AT+ 19's from would be great to hear from you as I had the last ones from Kwick Fit mid last year.My 16 Discovery 4 Commercial Mobile Workshop and Escort Vehicle
MY 07 Full Fatt Range Rover Vogue SE TDv8
1952 Series 1 80" 3ltr Straight 6 with Overdrive
7th Feb 2024 7:19 pm
Down&Dirty
Member Since: 17 Aug 2012
Location: Somewhere out back
Posts: 1293
Member Since: 18 Jul 2020
Location: Newton Abbot, DEVON
Posts: 24
Thanks for the link, interesting reading. Poss an AT tyre problem by the looks of it I'm guessing softer sidewalls and things moving around more than a dedicated road tyre.
Looks like I will be looking for a set of wheels as well as new tyres later this year.My 16 Discovery 4 Commercial Mobile Workshop and Escort Vehicle
MY 07 Full Fatt Range Rover Vogue SE TDv8
1952 Series 1 80" 3ltr Straight 6 with Overdrive
1st I've heard of with Pirelli's, issue is usually associated with GGAT.
4.5 sets of Duratracs without issue herePaul.
06 Java Black HSE - gone
12 Baltic Blue HSE - gone
15 Fuji HSE Lux
Club Biscuits, mmmm nice!
Traxide/Luna hybrid & Yellow top
Some Prospeed bits
+ some other stuff
Club N.E.R.D.s.
8th Feb 2024 6:07 pm
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2919
I've had it happen with Scorpion Zeros, BFG AT and MT tyres on a micture of 17, 18 and 20" rims - all of which were used extensively off road.
One failure to date - a BFG AT popped off an original 17" rim whilst driving through a motorway contraflow whilst towing a trailer. Somewhat sub-optimal to put it mildly
I have a 'significant' collection of spare wheels/tyre sets as a result, and will shortly be adding to these as we have just bought another D4 to replace the D3 which is now on 293k - consequently my spare 18" rims are no longer required.
Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
Thought my pile in the shed was growing 🤣🤣🤣
As said, many comments re GG’s over the years though ‘most’ were 3-4 years back, dodgy batch maybe 🤔
Never had issues with mine & also used significantly off tarmac.
I’ll have a set of 6 19’s coming up soon, ran them permanently on the D4 with Duratracs on.Paul.
06 Java Black HSE - gone
12 Baltic Blue HSE - gone
15 Fuji HSE Lux
Club Biscuits, mmmm nice!
Traxide/Luna hybrid & Yellow top
Some Prospeed bits
+ some other stuff
Club N.E.R.D.s.
8th Feb 2024 9:07 pm
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2919
That picture was taken after I had sold two full sets of wheels and tyres!Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
8th Feb 2024 9:12 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13541
Re: Wheel rim wear
noworries4x4 wrote:
I have had a slow puncture for weeks now and it was starting to get annoying so finished early yesterday and went to get it sorted. Into the big bath no bubbles nothing obvious. Tyre removed small nail through the middle happy days easy repair. But NO ! The inside of the inner rim was worn in quite sharp grooves by the tyre bead. The manager very experienced said he has only seen it on Volvo XC 90's and didn't know the cause.
I run permanent full weight ie 3260Kgs rotate the wheels regularly corner to corner and across the car in between so I can only assume all the wheels will have the same damage. I run 48psi in the rears and 42psi in the front ie 5 psi above the heavy load on the tpms tyres are Pirelli AT+ very good tyres all round.
Anyone any ideas whats chewing the inside of the rims up ??
Also if anyone knows where to get more Pirelli AT+ 19's from would be great to hear from you as I had the last ones from Kwick Fit mid last year.
42/48psi? That seems to be somewhat excessive. Why such high pressures?
As for the Pirelli AT+, Pirelli have stopped supplying it to the UK in LR-suitable sizes. You can probably import it from somewhere in Europe but at what cost? Shame, as I liked them on my RRS.Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
8th Feb 2024 10:24 pm
Worms
Member Since: 24 Sep 2023
Location: Highlands
Posts: 398
As another one with a growing pile of old alloy wheels from various vehicles (most complete with old tyres) that are realistically never going to be used again... How does one get rid of them? I'm guessing Council recycling won't take anything that still has a tyre on it, but would take the wheel?Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel
9th Feb 2024 6:15 am
JordsDisco
Member Since: 22 May 2020
Location: Newcastle
Posts: 1614
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73080
Had similar issue recently in Inverness. Couldn’t give the wheels away so had to pay to take the tyres off, then going to get the rims weighed in at a scrapyard, £1/kg.
I run permanent full weight ie 3260Kgs rotate the wheels regularly corner to corner and across the car in between so I can only assume all the wheels will have the same damage.
Don't know if it applies to all tyres but I thought tyres should not be swapped such that direction of rotation is changed, so if doing corner to corner, you should get them flipped on the wheel.
Can't do that with mine as they have an inside/outside design..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
9th Feb 2024 9:31 am
noworries4x4
Member Since: 18 Jul 2020
Location: Newton Abbot, DEVON
Posts: 24
Worrying Update On Rim Wear
A slightly worrying update on the rim wear issues I am having at the moment.
I arrived back into the yard Thursday night and found that the tyre that had had the puncture 3 weeks ago was flat, mmmm. Inflated it could hear air escaping but could not see nail screw etc. Wheel off the car the air was leaking round the rear rim. Once the bead was broken the new rim fitted literally 3 weeks ago was worn and damaged, tyre is now knackered.
I have emailed Pirelli to see if they have an answer, I have spoken to AJS Tyres as they deal with Land Rovers 24/7 and they have seen the problem but have never grounded out an answer.
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
My 16 Discovery 4 Commercial Mobile Workshop and Escort Vehicle
MY 07 Full Fatt Range Rover Vogue SE TDv8
1952 Series 1 80" 3ltr Straight 6 with Overdrive
25th Feb 2024 11:12 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1664
Could it be the combination of permanent full weight ( not sure if you mean you tow or just have the car fully loaded), plus the very high tyre pressures you're running causing the issues?Gary
-------------------------------------------
Discovery 4 HSE 2016MY
25th Feb 2024 12:31 pm
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2083
I had a wheel wear out like this on a D3 about 10 years ago , tyre looked OK and running at Normal pressures , not full load. It put a saw through it before scraped it to stop it being used , as it was so thin.
I think there might be a thread on this from years ago. https://www.disco3.co.uk/forum/wheel-rim-w...wheel+wear
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
