Hi Everyone would just like to let you all know after much looking testing and head scratching and many thanks to previous posters juanbass and The_Wombat regarding fault code C1A34-01 (AF) Rear right corner valve - General failure information - general electrical failure.
I had both rear suspension arms changed at a Landrover specialist and it came back with this fault and was told it was there when i dropped it off..
. well it was not so set about investigating myself and thank the lord for this Forum again as it pointed me in the direction of a broken wire Orange/Black or Purple/Black on the rear suspension loom that plugs into the rear suspension valve after stripping the insulation back there it was broken Orange/Black wire... about 2 inches from the plug behind the NS Rear shock connected back up and re insulated plugged it all back up cleared all old faults and re calibrated suspension with the GAP OB11 excellent tool and all good
Just wanted to share so that somebody else can deal with this through the forum See Photos
Regards Mark2005 Discovery 3 TDV6 HSE 106K and counting,Owned for the last 12 years
10th Jan 2021 4:00 pm
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
old post I know, but I had exactly this problem at the weekend, wire snapped/corroded just after the connector.
it's why this site is so brilliant - many, many thanks to the OP - you're a star!
Hi Ballast I am glad that this old post has helped someone to find this fault and thank the lord for this forum so much information on here. 2005 Discovery 3 TDV6 HSE 106K and counting,Owned for the last 12 years
19th Mar 2024 12:29 pm
Chriswilks68
Member Since: 27 Mar 2024
Location: Hampshire
Posts: 1
Rear Left Valve
sorry to jump on your post.
So I have the same code but rear left valve (Permanent rear left valve), I have replaced the rear left valve mid valve by the compressor front Valve and compressor but still got the code, I also have a code saying invalid data revived from the dynamics control module.
I will check the wires on the plug
I would really appreciate some help
27th Mar 2024 2:43 pm
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
I think it's cabling rather than actual valve - did you manage to solve it?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum