Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Faults & Fixes (D4)

Fitted: Latest LR spare wheel Winch D4 with AdBlue tank
Post Reply  Down to end
Page 1 of 1
RRUK
Site Supporter 


Member Since: 16 Aug 2005
Location: UK
Posts: 676

United Kingdom 2016 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4
Fitted: Latest LR spare wheel Winch D4 with AdBlue tank

So,

My spare wheel winch gave up last weekend and after some investigation I found that because mine is a 2016 car, it’s a Euro 6 with the AdBlue tank inside the spare wheel area under the car.

So, the difference is that the wheel is held upside down compared to previous cars and you get a wheel protector disc that the winch end latches into. See photo below.

I bought a new unit (part. LR 093370) and when it arrived I noticed it’s been modified by Land Rover to prevent spare wheel theft. There’s an extra metal cage that the spare wheel protector goes up into.

As you can see from the photo of the 2 units side by side the change is apparent.

It was no harder to fit and I didn’t need to undo the AdBlue tank to wiggle it past. It’s a
Squeeze but all went fine.

Happy to answer questions

Click image to enlarge



Click image to enlarge


Click image to enlarge


Click image to enlarge
 1998 Defender 110 TUM HS FFR Hard Top XD WOLF

2016 Discovery 4 HSE

1982 Series 3 2.25 Petrol Hard top- Oscar, as featured in Classic Land Rover Magazine for 7 months 
 
Post #23498577th Oct 2023 6:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Matt Rivers
 


Member Since: 31 Jan 2012
Location: W.Sussex
Posts: 2

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo GreyDiscovery 4

Hi.
I am very inexperienced and have not found it at all straightforward to get the new winch past the ad-blu tank and the long down-pointing bolts. I got the old one off and found that they have slightly different angles on them.
A question: I bought this 2016 model recently, and then found out that the wheel had been stolen. The dealer kindly sourced me a wheel and new winch, at no cost to me. Assuming I am able to get the new winch into place, will I be able to attach the wheel or do I also have to get that wheel protector?

I have just realised that I have an aftermarket one, with no number on it. Is that likely to be the problem, anyone?
Thanks.
  
Post #236903718th May 2024 10:29 am
View user's profile Send private message View poster's gallery Reply with quote
HairyFool
 


Member Since: 04 Jan 2023
Location: North Essex
Posts: 676

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto ZanzibarDiscovery 4

The winch actually attaches to the protector not the wheel so yes, you will need the protector.
 A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.  
Post #236908618th May 2024 8:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Matt Rivers
 


Member Since: 31 Jan 2012
Location: W.Sussex
Posts: 2

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo GreyDiscovery 4

Great! Just a little more expense...
Thanks.

Does anyone know if the non-LR winch (which is way cheaper) actually fits? It looks like the AdBlue tank will have to off to fit this one, which will be a huge waste of effort if it doesn't then fit.
  
Post #236916419th May 2024 8:19 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site