Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
[For Sale] SW Tigershark 11500 SR Winch & Hidden mount
Superwinch Tigershark 11500 with synthetic rope & corded remote control.
Removed from my D3, this set-up although looking a little weathered has only been used twice!
When I installed this winch I used the RLD hidden mount as a base and modified it to accommodate my AlliSport Intercooler (will still fit standard) and made a proper mount for the hawse. I also shortened the corners to reduce the amount of bumper internals to be trimmed.
I used the genuine Superwinch remote solenoid kit which consists of extended cables and connectors.
It would need a new solenoid as the waterproof box I mounted it in wasn’t so waterproof. The solenoid was sloshing about in water so I’d recommend replacement (approx. £45 for genuine). All solenoid brackets/connectors and cover included if wanting to refit solenoid to original location on top of winch.
Possibly needed would be the 2 brackets to mount the air suspension valve block and washer bottle. I forgot and left these on the Disco These were included with the RLD mount when I bought it but are very simple and could easily be made.
Also included is a Superwinch pulley block (unused), winching strap (unused), shackles, isolation switch and mount, a few spare connectors and spare cables.
This set-up cost me over £1000, so a bargain at £450 ovno collected (Nr. Banbury J11 M40).
Photos below with a couple of pre-install shots for reference.
[/b]
A few more pics, internals like new! End caps could do with a repaint.
3rd Jun 2023 9:36 pm
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
Didn’t have any interest first time round, so anyone want to make a sensible offer before I put it on eBay…..?
19th Jul 2024 4:04 pm
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
NOW RECOMMISSIONED!
I have recommissioned the winch and it’s now ready to go in full working order!
I have reinstalled the solenoid box back on motor as standard, the Superwinch remote solenoid kit (basically 4 cables) are included.
Winch and tray available separately if wanted.
It’s going on eBay soon, so make an offer quick!
Shipping to UK Mainland address is approx £40 for Winch only as pictured here.
Click image to enlarge
Click image to enlarge
Click image to enlarge
24th Jul 2024 7:45 pm
D3faf
Member Since: 10 Aug 2022
Location: Devizes
Posts: 25
Is this setup still available?
3rd Aug 2024 7:37 am
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
The winch is still available, as pictured above.
The tray is Sold, the pulley block is still available and advertised separately on here.
3rd Aug 2024 8:47 am
D3faf
Member Since: 10 Aug 2022
Location: Devizes
Posts: 25
That's a shame. I was after the whole lot.
What are you wanting for the winch? I might be able to get a friend to make up the lr time winch tray.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
These were included with the RLD mount when I bought it but are very simple and could easily be made.
