Rseanv
Member Since: 08 Apr 2019
Location: Tarn et Garonne
Posts: 5
  
|
| Headlight adjustment - Xenons |
|
During my 2012 L319’s Contrôle Technique (French MoT), they tweaked my headlights because they thought they were too low (<4%) and having just driven at night for the first time since, I’m blinding everyone! 
Is it a simple adjustment or do I need to go back & get it re-tested?
Thanks for any advice.
|
 31st Jul 2024 2:14 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
 
|
Easy adjustment, park facing a wall or garage doors about 10 mtr away when dark lift the bonnet, you will need a long torque screw driver or a long extension 1/4 drive socket to fit the torque screws to adjust up down or sideways, with the lamps switched on you will see how much you have adjusted them, best to find the screws in daylight as they are located down a hole behind the lamps and to check your tool will fit and reach them, fi using a socket make sure it is a good fit on the long extension or you may loose it. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 31st Jul 2024 5:28 pm |
|
|
Rseanv
Member Since: 08 Apr 2019
Location: Tarn et Garonne
Posts: 5
|
Thanks for that. I was just concerned that there might be something more complicated 😬
|
| 31st Jul 2024 8:04 pm |
|
|
