Member Since: 24 Jun 2021
Location: West Sussex
Posts: 442
Has anyone changed one of these?
Ok so whilst checking a top egr blanking plate as it was not tight I noticed a bit of coolant. Now discovered what it is, coolant thermostat housing, see pic. Wondering if anyone has changed one and the procedure. Thanks.
16th Jan 2022 1:48 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10679
most disco owners have changed these
fairly easy to change,
the only silly thing is that the rear seal to the cooler isn't supplied with it and not easy to track down
Last edited by Pete K on 16th Jan 2022 3:15 pm. Edited 1 time in total
16th Jan 2022 2:50 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753
I’ve never had the “privilege” of changing one of those but I’ve changed one of these instead
Click image to enlarge
16th Jan 2022 3:12 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10679
oh, and there is no thermostat is the diesel one. Thats low down
16th Jan 2022 3:16 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I did and as stated the o rings dont come with it, I did a thread on it somewhere
16th Jan 2022 3:32 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I then looked at the other part number and went through them one by one
OEM reference number(s) comparable with the original spare part number
OEN 1981 71 — CITROËN
OEN 1665178 — FORD
OEN W 700100 S300 — FORD
OEN 1981 71 — PEUGEOT
The Ford part number comes up at £1.30 each , alas seller is away till 20/1/22
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum