Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > Technical (D3)

d3 suspension cry for help
Post Reply  Down to end
Page 1 of 1
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 
d3 suspension cry for help

Hi I am looking for help to fix a disco3 2007 lhd with suspension problems. A nanocom was used to read the dtc's after deleting the list of problems the ones that came back were as per photos attached.
So farI have disconnected the exhaust valve and when powered it clicks, and have the lh headlamp out to look at the multi connector and wires there which look fairly clean and none broken. My next thought was to get back to the control unit and check that the supply from there to the exhaust valve had continuity. I was going to remove the exhaust valve to check it is clean and not sticking but as the unit was new this year thought that was unlikely to be the problem.
I don't have easy access to anything other than an old snap on ethos code reader, my series cart spring land rovers diagnostic sockets hold my eyeballs if you get the drift.  
Post #237609728th Aug 2024 5:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 

Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge
  
Post #237609828th Aug 2024 5:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 

apologies for repeating first photo frankly i am amazed to have any actually posted.  
Post #237609928th Aug 2024 5:51 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10608

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Saying the exhaust valve or wiring is faulty.

It’s part of the compressor.
When you lower the car it should hiss. That’s the exhaust valve working.  
Post #237610528th Aug 2024 7:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 

yes I understand that the dtc says its not working and the other dtc point to a module failure which is apparently unlikely so I am trying to establish what else it could be  
Post #237610728th Aug 2024 7:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10608

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Sorry. Read your text now.

Yes, good plan. Check wiring back to ecu.  
Post #237610828th Aug 2024 7:50 pm
View user's profile Send private message View poster's gallery Reply with quote
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 

hopefully that wont take long tomorrow if not it's where to go after that  
Post #237610928th Aug 2024 7:52 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10608

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Can only be 3 things really.

Wiring
Ecu
Exhaust solonoid  
Post #237611028th Aug 2024 8:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Tachyon
 


Member Since: 27 Aug 2024
Location: charente
Posts: 7

France 

I hope so but have mémories of an E46 BMW I have that wipers, windows,indicators and other things malfunctioned causée by a faut in thé radio speakers amplifier circuit - and no dtc suggested that  
Post #237611928th Aug 2024 9:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1807

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

Which exhaust valve was replaced?  
Post #23763912nd Sep 2024 11:06 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site