| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 228
  
|
2007 TDV6 D3
I don't use the handbrake much, but the other half is driving and just pulled the button to engage it and nothing. It doesn't seem to be reacting to the switch.
Any ideas what could cause this?
At least it's not jammed on!
|
 1st Sep 2024 1:10 pm |
|
|
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 228
|
Just to add, no warning lights on or anything. And the dash lights all do what they should at startup.
|
| 1st Sep 2024 1:12 pm |
|
|
Daphne
Member Since: 22 Jan 2024
Location: Kent
Posts: 6
|
Service the rear hubs.
|
| 2nd Sep 2024 7:43 am |
|
|
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 228
|
The pads are on the list when I get a moment. Would low pads (on the valiper, not the handbrake shoes) cause this? I will adjust the brake shoes while I am there.
|
| 2nd Sep 2024 7:45 am |
|
|
Daphne
Member Since: 22 Jan 2024
Location: Kent
Posts: 6
|
Handbrake is not connected to the disc brakes
|
| 2nd Sep 2024 7:47 am |
|
|
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
 
|
Does the brake sound like it's activating? If not, maybe the fuse has blown. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
|
| 2nd Sep 2024 1:57 pm |
|
|
Cheeko
Member Since: 04 Jul 2024
Location: Leeds
Posts: 232
 
|
Hand break fails usually because people don’t use it. I’ve just rebuilt myne what a pig of a job lr times videos on this was what helped me through good luck
|
| 4th Sep 2024 3:43 am |
|
|
Oswiperus
D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1600
|
If you can't hear anything at all when operating it then it may be the switch, they have been known to fail on occasion. Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone 
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
|
| 4th Sep 2024 7:51 am |
|
|
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 228
|
skunk38 wrote:Does the brake sound like it's activating? If not, maybe the fuse has blown.
No, nothing at all so i suspect you are right. I havent had chance to check yet as I am away. At least if it cant activate, it shouldnt get stuck on!!
|
| 4th Sep 2024 8:45 am |
|
|
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 228
|
Oswiperus wrote:If you can't hear anything at all when operating it then it may be the switch, they have been known to fail on occasion.
Ah - do they. Is it possible to short across terminals to mimic the switch to test this before buying a new one (havent looked at prices yet).
|
| 4th Sep 2024 8:46 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
