| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
  
|
Went to use my D4 this afternoon and had an amber EML light on, so took SWMBO's Kia instead. When I got home I pulled the codes and cleared down. The following come back immediately, so I will swap the MAFs over to check the fault follows the device. As I suspect the MAF rather than wiring, I was wondering if there are any brands to choose or avoid? My usual go to is Advanced Factors who have a Hella or Pierburg part. Elsewhere Bosch and VDO appear to be the main alternatives from the larger brands. Will likely go with a Hella part from AF.
P010B-22 - Mass or volume air flow B circuit - range/performance - General signal failure - signal amplitude>maximum (68)
( on 01-10-2024 15:47:23 at 182906 mi )
P010D-00 - Mass or volume air flow B - circuit high (AB)
( on 01-10-2024 15:44:02 at 182906 mi )
Regards,
Steve
|
 1st Oct 2024 9:21 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6748
  
|
Siemens VDO is the original manufacturer for the MAF in the diesels.
|
| 1st Oct 2024 10:37 pm |
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
|
Thanks, that is good to know and fits with the two one the car being made in Germany. Once I confirm component failure I will source a VDO replacement.
Regards,
Steve
|
| 2nd Oct 2024 7:35 am |
|
|
Sundayjumper
Member Since: 23 Sep 2024
Location: Berkshire
Posts: 102
 
|
I'm new to Land Rover but in previous cars I've always stuck to Bosch. Avoid anything unbranded from ebay etc, I've heard far too many failures.
|
| 2nd Oct 2024 8:13 am |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6748
|
I believe Bosch is the OE for the MAF in the D4 SCV6 while Denso is the OE for the MAFs in the D4 V8 as well as the D3 V8 and the D3 V6.
In this case you’d get the same component as you would buying LR branded one but without the green oval “value add” on the price tag.
|
| 2nd Oct 2024 9:05 am |
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
|
My P010D error became a P013D and moved back again after swapping the MAFs, so time to order a replacement.
Regards,
Steve
|
| 2nd Oct 2024 12:03 pm |
|
|
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
|
Thanks for the offer, but I had ordered one just after my previous post. Hopefully it will be arriving this morning.
Regards,
Steve
|
| 3rd Oct 2024 7:38 am |
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
|
All fixed. My (eBay) order from Maltings arrived about an hour ago, in time for a lunch break. The faulty MAF did look dirty compared to the other, so once I had confirmed which was faulty I thought I had nothing to lose if I tried spraying brake cleaner on the sensor. It still showed an error, so good to know it wasn't just dirty.
Maltings listed a VDO unit on their website and eBay, but for some reason the eBay item was ~£10 cheaper. The delivered part is Continental branded, but I believe they own the VDO business now, so happy with the outcome. The codes have cleared and it runs OK. Not been on a test drive yet as I need to replace the rear brake parts first, assuming the wear sensor arrives today.
Regards,
Steve
|
| 3rd Oct 2024 1:04 pm |
|
|
Jamiehol
Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387
|
Maltings eBay shop can be cheaper at times than there web shop I check both before ordering from them.
|
| 3rd Oct 2024 2:51 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
