Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > General

Compact Two Post Ramp Query - Body Removal
Post Reply  Down to end
Page 1 of 1
Kelman70
 


Member Since: 10 Aug 2018
Location: Peterhead Aberdeenshire
Posts: 150

Scotland 2006 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3
Compact Two Post Ramp Query - Body Removal

Hi Folks looking for a bit of info from anyone that may have a two post compact ramp, slightly less wide than standard and lower height to fit into a shed with a low roof.

considering buying one to upgrade my current mid rise scissor lift and wondering if its possible to remove the body of a disco with one, as in will the arms reach the points on the body to lift it off with being slightly less wide than a standard two post ramp

Distance between arms on compact is around 2200mm and normal is around 2550mm

https://www.twinbusch.co.uk/2-post-lifts/B...::278.html

Above is the model i was looking at.

interested to find out if anyone has used a compact two post to remove a body before i commit to purchasing

Thanks
Martin
  
Post #237993120th Oct 2024 8:37 pm
View user's profile Send private message View poster's gallery Reply with quote
kajtzu
 


Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6753

Finland 2005 Discovery 3 4.4 V8 HSE Auto Cairns BlueDiscovery 3

I think the people on the lrtime YouTube channel have a two post ramp outside their home that they use in many of the episodes. You could ask them for their experiences.

Not sure if this is helpful or not.
  
Post #237993320th Oct 2024 8:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Kelman70
 


Member Since: 10 Aug 2018
Location: Peterhead Aberdeenshire
Posts: 150

Scotland 2006 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

yeah i believe there's is a full size two post ramp. but yeah might be worth a message Thumbs Up
  
Post #237993820th Oct 2024 9:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Jamiehol
 


Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387

United Kingdom 

I would have said it will, you only need to get the lift pads onto the sills to lift the body off.

My 2 poster isn’t that much wider than the discovery itself, can measure the distance between the posts next Saturday when I’m at my workshop.
  
Post #237994621st Oct 2024 5:46 am
View user's profile Send private message View poster's gallery Reply with quote
Sundayjumper
 


Member Since: 23 Sep 2024
Location: Berkshire
Posts: 104

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Indus SilverDiscovery 4
Re: Compact Two Post Ramp Query - Body Removal

Kelman70 wrote:
...to fit into a shed with a low roof.


How low ?

I'd guess that the lift is fine, but if you have a low roof you'll want to check there's actually enough height to get the body clear ! The car's over 6' as it stands and you must need at least 2' (?) to get it clear of stuff ? So fag packet maths your shed needs to have a clear 9' headroom. Preferably more.
  
Post #237995121st Oct 2024 9:14 am
View user's profile Send private message View poster's gallery Reply with quote
Kelman70
 


Member Since: 10 Aug 2018
Location: Peterhead Aberdeenshire
Posts: 150

Scotland 2006 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Yeah the height is ok i can get the mid rise scissor lift to almost full height with the disco on it so will have enough clearance it was more the sill access i was concerned about with being less wide.
  
Post #237996321st Oct 2024 1:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Kelman70
 


Member Since: 10 Aug 2018
Location: Peterhead Aberdeenshire
Posts: 150

Scotland 2006 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Jamiehol wrote:
I would have said it will, you only need to get the lift pads onto the sills to lift the body off.

My 2 poster isn’t that much wider than the discovery itself, can measure the distance between the posts next Saturday when I’m at my workshop.


cheers that would be great
  
Post #237996421st Oct 2024 1:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Jamiehol
 


Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387

United Kingdom 

No problem I’ll get the dimensions at the weekend, but in the meantime here is a picture on my D3 on my two poster.


Click image to enlarge
  
Post #237997221st Oct 2024 4:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Jamiehol
 


Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387

United Kingdom 

Kelman70 wrote:
Jamiehol wrote:
I would have said it will, you only need to get the lift pads onto the sills to lift the body off.

My 2 poster isn’t that much wider than the discovery itself, can measure the distance between the posts next Saturday when I’m at my workshop.


cheers that would be great


Just measured my 2 poster and the distance between the posts is 2.6M
  
Post #238031326th Oct 2024 8:28 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site