Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > Technical (D3)

SYSTEM FAULT SPECIAL PROGRAMS NOT AVAILABLE
Post Reply  Down to end
Page 1 of 1
AntonLR3
 


Member Since: 14 Nov 2024
Location: Vännäsby
Posts: 5

Sweden 2008 LR3 TDV6 GS Auto Siberian SilverLR3
SYSTEM FAULT SPECIAL PROGRAMS NOT AVAILABLE

Hi

I have a irritating problem with my disco3

This message pops up on start and the car also gets limp mode. No warninglight on dash just the message.

I get codes from my icarsoft reader
U0401-94
U0416-94


Once in a while it starts normal but after a while the message pops up and im back in limpmode.

I have changed battery and checked some connectors but nothing have made a difference. Suspension gerbox, handbrake and high/low works perfect.

Anyone have ideas?


Click image to enlarge
  
Post #238161814th Nov 2024 11:24 am
View user's profile Send private message View poster's gallery Reply with quote
Wilsonator77
 


Member Since: 17 Nov 2024
Location: Lincolnshire
Posts: 2

United Kingdom 2005 Discovery 3 TDV6 S Manual Bonatti GreyDiscovery 3

Hi mine has just started doing the same, did you find what the issue is  
Post #238180517th Nov 2024 2:56 pm
View user's profile Send private message View poster's gallery Reply with quote
AntonLR3
 


Member Since: 14 Nov 2024
Location: Vännäsby
Posts: 5

Sweden 2008 LR3 TDV6 GS Auto Siberian SilverLR3

Im still in the dark with this. Im working on it every day so hopefully ill find the issue soon.  
Post #238182017th Nov 2024 6:13 pm
View user's profile Send private message View poster's gallery Reply with quote
loanrangie
 


Member Since: 18 Jun 2017
Location: Melbourne
Posts: 699

Australia 2008 Discovery 3 TDV6 SE Auto Stornoway GreyDiscovery 3

Try a better reader like a gap tool, should be some hard codes if you are getting communication errors.  
Post #238183118th Nov 2024 2:49 am
View user's profile Send private message View poster's gallery Reply with quote
AntonLR3
 


Member Since: 14 Nov 2024
Location: Vännäsby
Posts: 5

Sweden 2008 LR3 TDV6 GS Auto Siberian SilverLR3

I have read out the codes with 3 different readers and this is the codes i get. Sadly i have 700km to the closet Land Rover dealer so that is not an option.  
Post #238183318th Nov 2024 7:58 am
View user's profile Send private message View poster's gallery Reply with quote
grzesiul
 


Member Since: 11 May 2008
Location: UK
Posts: 6398

Poland 2016 Discovery 4 3.0 SDV6 SE Auto Loire BlueDiscovery 4

try doing proper hard reset

mostly those codes are BCM related hard reset might help or solve but not guarantied

if hard reset does not improve things I would start looking at all connectors going to BCM engine ECU and all more exposed for oxidation of pins and stuff of clearly visible harness damage
have you checked you charging level when car operates normally
good luck

G  
Post #238183518th Nov 2024 8:22 am
View user's profile Send private message View poster's gallery Reply with quote
AntonLR3
 


Member Since: 14 Nov 2024
Location: Vännäsby
Posts: 5

Sweden 2008 LR3 TDV6 GS Auto Siberian SilverLR3

Hi

I have already done the hard reset several times, it does not cure the system fault. It is totally random when it comes on or not.

Some times i can start the car with no fault warnings at all (still in limp mode) and drive around with it and the warning message dont appear until i twist the drive mode selector.  
Post #238183618th Nov 2024 8:26 am
View user's profile Send private message View poster's gallery Reply with quote
grzesiul
 


Member Since: 11 May 2008
Location: UK
Posts: 6398

Poland 2016 Discovery 4 3.0 SDV6 SE Auto Loire BlueDiscovery 4

maybe gear selector has the issues than since it is kinda directly resulting in fault appearing?  
Post #238183918th Nov 2024 9:32 am
View user's profile Send private message View poster's gallery Reply with quote
AntonLR3
 


Member Since: 14 Nov 2024
Location: Vännäsby
Posts: 5

Sweden 2008 LR3 TDV6 GS Auto Siberian SilverLR3

I have been thinking so too, i have a used center console on the way. I will try to swap it out and see if it works

I have been thinking about the instrument cluster too, it might be faulty.  
Post #238184018th Nov 2024 9:34 am
View user's profile Send private message View poster's gallery Reply with quote
grzesiul
 


Member Since: 11 May 2008
Location: UK
Posts: 6398

Poland 2016 Discovery 4 3.0 SDV6 SE Auto Loire BlueDiscovery 4

gear selector gathers lots of crap from users and activity around it and not waterproof so i guess if water ever got there at all would defo cause issues

G  
Post #238184418th Nov 2024 10:31 am
View user's profile Send private message View poster's gallery Reply with quote
Wilsonator77
 


Member Since: 17 Nov 2024
Location: Lincolnshire
Posts: 2

United Kingdom 2005 Discovery 3 TDV6 S Manual Bonatti GreyDiscovery 3

Hi mate like I said mines doing the same thing so I bought a icarsoft v2 cleared all codes and went into limp mode and same message as yours and code came out as p2290 quick google and appears fingers crossed just the fuel filter well I’m hoping it’s that’s as i have never changed it yes since i bought it 8 months ago but was on the to do list 🤞🤞🤞  
Post #238188318th Nov 2024 7:25 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site