Adiver
Member Since: 18 Jan 2006
Location: Rutland
Posts: 495
  
|
I have just got a gap iid and it is paired to the car correctly and can read everything
Problem is I don’t know how to use it 😂
I had a problem with the drivers door lock and replaced the latch module. Since then if you open any door before the drivers door you can’t open the drivers door without locking the car again and opening the drivers door first.
Is there any way of resetting the car with the gap tool so I can unlock all the doors together ? Does this need the gap tool? If so how?
Thanks
Jon D4 SDV6 HSE
|
 26th Nov 2024 3:34 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10734
 
|
No real diagnostics for the locks.
Sounds like a problem with the part you fitted or wiring. haveyou tried pressing unlock twice or 3 times ?
If only the drivers door is unlocking, there is a solution for that, but that isn't what you wrote
|
| 26th Nov 2024 3:42 pm |
|
|
Adiver
Member Since: 18 Jan 2006
Location: Rutland
Posts: 495
|
It’s kind of the reverse of the security feature where all doors remain locked when you open the drivers door first.
If I open the drivers door first I still have to use the unlock button on the drivers door to open the rest of the car. I’m ok with this as it stops anyone else getting in the car from the other side when I open the drivers door.
But what I have is really annoying as anyone can open any other door and I can’t get in the drivers door! I have to relock the car first, then open the drivers door.
It’s keyless entry. D4 SDV6 HSE
|
| 26th Nov 2024 3:47 pm |
|
|
